論文

Background: Patellofemoral complications are one of the major issues after total knee arthroplasty (TKA). Excessive patellofemoral joint pressure is associated with complications after TKA surgery, and the amount of patellar osteotomy has a direct effect on patellofemoral joint pressure. The purpose of this study was to evaluate the influence of patella thickness on patellofemoral pressure in TKA. Methods: Five freshly frozen cadavers were operated with a custom-made Stryker posterior stabilizing type knee joint prosthesis. Patellofemoral joint pressure was measured using a pressure sensor, with the knee joint flexed from 90 to 110 degrees, and with patellar thickness of − 2 mm to + 4 mm. Results: Increasing or decreasing patellar thickness significantly increased or decreased patellofemoral pressure. Regarding knee flexion angle, patellofemoral pressure increased with increasing patellar thickness at all flexion angles, but the pressure increase was greatest at 90 degrees of knee flexion and smallest at 110 degrees. Conclusions: The amount of patellar osteotomy influences the patellofemoral pressure. Surgeons should avoid increasing patella thickness, since the resulting increased patellofemoral pressure may reduce knee joint function.

Background: Clinical outcomes of kinematically aligned total knee arthroplasty (KA-TKA) have been reported as comparable or superior to those of mechanically aligned TKA (MA-TKA). However, cruciate-retaining prostheses have mostly been used for KA-TKA. This study used medial pivot knee prostheses for KA-TKA, and knee kinematics after KA-TKA were assessed and compared with those after MA-TKA. Methods: Thirteen knees in 9 patients undergoing primary TKA (8 KAs, 5 MAs) were subjected to two-dimensional (2D) to three-dimensional (3D) registration analysis at 1 year postoperatively. Each patient performed weight-bearing activities, and movements were recorded as intermittent digital radiographic images. Three-dimensional implant positions during activities were analyzed for anterior-posterior translation in the sagittal plane, condylar liftoff and mediolateral translation in the coronal plane, and femoral rotation in the axial plane. Results: Posterior translation of the lateral femoral condyle from 0° to 100° was larger in KA-TKA than in MA-TKA (P = .006). The degrees of condylar liftoff and mediolateral translation were comparable between TKAs. Total external rotation of the femoral component relative to tibial component was significantly greater for KA-TKA (7.7 ± 5.2°) than for MA-TKA (1.3 ± 3.3°; P = .03). The kinematic path of the femoral component revealed greater medial pivoting motion in KA-TKA than in MA-TKA. Conclusions: KA-TKA using a medial pivot knee prosthesis successfully reproduced the medial pivot pattern and achieved larger femoral external rotation relative to the tibia than MA-TKA. KA-TKA was able to maximize the primary concept of the medial pivot knee prosthesis.

Background: For knee osteoarthritis (OA) treatment, it is important to correct the lower limb alignment including the foot. However, in the upright position, lower limb alignment is generally assessed from the body surface or radiographs, and it is a challenge to capture the exact characteristics of three-dimensional lower limb alignment. The purpose of the study was to measure lower limb alignment in patients with knee OA using upright computed tomography (CT) and radiography, and to identify features of knee joint deformity. Methods: A total of 45 limbs in 25 patients with knee OA were enrolled. The subjects underwent both upright CT and radiography for the whole lower limb in the standing position. The joint angles were calculated on both images. The degree of knee OA was classified according to Kellgren-Lawrence (KL) grade by referring to radiography, which is mainly based on the degree of articular cartilage loss and severity of osteophytes, and the characteristics or correlation between knee and ankle joint in each group was investigated. Results: In KL-I, there was an association between varus of the knee joint and internal rotation of the talocrural joint (r = 0.76, P < 0.05). In KL-II, there was an association between varus of the knee joint and eversion of the subtalar joint (r = 0.63, P < 0.05) and talocrural joint (r = − 0.65, P < 0.05). In KL-III, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = − 0.62, P < 0.05), and in KL-IV, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = − 0.58, P < 0.05). Conclusions: The lower limb alignment of patients with knee OA in the standing position was found that as knee OA worsened, it became apparent that compensatory knee joint alignment depended on the ankle joint rather than the subtalar joint. The results may help in the rehabilitation of patients with knee OA, since the ankle joint alignment has a significant impact on the knee joint during coarse movements involving load.

Purpose: Although pain phenotype affects clinical score in patients with knee osteoarthritis (OA), little information has been available on the relationship between pain phenotype and gait analysis. The purpose was to investigate the relationship between pain phenotype and gait parameters. Methods: A total of 34 patients (24 females and 10 males) with end-stage medial compartmental knee OA participated. All the patients were evaluated based on pain detect questionnaire (PD-Q) and pain catastrophizing scale (PCS). They were divided into two categories: Group Low (PD-Q score ≤ 12) and Group High (PD-Q score > 12), PCS + (PCS ≥ 23) and PCS- (PCS < 23). Gait analysis was performed using three-dimensional motion analysis system. Statistical analysis was done to compare gait parameters between groups for each allocation of PD-Q or PCS, separately. Results: Peak vertical ground reaction forces in Group Low and High were 0.99 ± 0.054 and 0.82 ± 0.17, respectively (P = 0.015). Peak knee adduction moments in Group Low and High were 0.70 ± 0.19 and 0.39 ± 0.14, respectively (P = 0.0022). For PCS allocation, knee extension limitation during mid-stance during gait were significantly larger in PCS- (P = 0.038). Conclusions: Patients with high PD-Q score had atypical gait pattern with smaller peak vertical ground reaction force and knee adduction moment, compared to patients with low PD-Q score. Moreover, patient with low PCS had different gait pattern in extension limitation, compared to those with high PCS. PD-Q and PCS would affect gait pattern in patients with knee OA. Level of evidence: III.

Background: Robotic-assisted total and unicompartmental knee arthroplasties (RA-TKA, RA-UKA) are increasingly used to enhance surgical precision and improve clinical outcomes. Despite their advantages, these systems introduce a learning curve, particularly for surgeons adapting to different procedural phases. The current literature lacks detailed analyses of phase-specific contributions to the learning curve and how these differ among implant designs. This study aimed to identify critical phases within RA-TKA and RA-UKA that contributed most to operative efficiency and to propose tailored educational strategies for each device. We hypothesized that device-specific learning curves could notably impact procedural durations. Methods: A total of 204 surgeries of RA-TKAs (bicruciate retaining [BCR] and stabilized [BCS]) and RA-UKAs were done using an image-free robotic platform by three experienced surgeons. Operative time was divided into eight procedural phases. Learning curves were evaluated for each device and phase using linear regression. The slopes of the regression lines were analyzed to quantify learning effects, with statistical significance assessed for each phase. Phase-specific contributions were interpreted based on the relative steepness of significant slopes. Results: The learning curve varied across devices and phases. The BCR exhibited the steepest learning curve, particularly in phase 5 (bone resection), whereas BCS demonstrated significant improvements in phase 5 as well, but to a lesser extent. The UKA showed notable learning effects in earlier phases, particularly in phase 3 (three-dimensional model creation). These findings highlighted device-specific differences in learning effects and underscored the critical importance of phase-specific training. Conclusions: The present study identified device-specific and phase-specific differences in the learning curve for image-free robotic systems. Both BCR and BCS required focused training in later phases, such as bone resection, whereas UKA benefited from targeted improvements in earlier phases like model creation. These insights emphasized the need for tailored training protocols to optimize outcomes in robotic knee arthroplasty.

Background: Kinematically aligned total knee arthroplasty (KA-TKA), in which femoral component is placed 3–5° of internal rotation relative to mechanically aligned (MA)-TKA, may have a potential risk of patellofemoral malalignment. This study aimed to assess patellofemoral alignment and compare the data between KA-TKA and MA-TKA, and the relationship with patellofemoral radiographic parameters and patient reported outcomes. Methods: Among patients who underwent TKA in 2015 and 2016 in our institute, 28 KA-TKAs with a metal-backed patellar component were retrospectively assessed for patellofemoral alignment, and 28 MA-TKAs with a metal-backed patellar component served as controls. A year postoperatively, patellar tilt and shift at 30°, 60°, and 90° knee flexion were measured on Merchant views and compared between the two TKAs. Implant positioning in each patient was assessed based on preoperative CT images and correlations of femoral component positioning with patellar tilt/shift were assessed. Results: Patellar shift at 30° flexion was significantly greater in KA-TKA than in MA-TKA (p = 0.04), whereas patellar tilt angle was comparable between the two TKAs. No statistical correlation was evident between femoral component positioning and patellar shift/tilt, regardless of knee flexion angle in the two TKAs. Knee Society Score 2011 at 1 year follow-up was comparable in all subcategories between the two TKAs. Conclusion: Radiographic analysis of KA-TKA revealed lateral shift of the patella at 30° knee flexion at 1 year postoperatively, however patients with patellar shift were asymptomatic. Further long-term observation is required to examine the impact of KA-TKA on the patellofemoral complication.

Purpose: Joint arthroplasty has shown favorable outcomes across various anatomical sites; however, complications such as peri-prosthetic joint infection (PJI) remain challenging. Despite the importance of understanding surgical field contamination, many details are unclear. This study aimed to evaluate the contamination status of the surgical field during joint arthroplasty procedures. Methods: A prospective study was conducted on 150 joint arthroplasty cases at a single institution, involving 38 men and 112 women with a mean age of 68.8 years. The cohort included 41 total shoulder arthroplasty (TSA), 31 total knee arthroplasty (TKA), and 78 total hip arthroplasty (THA) procedures. Bacterial cultures, including anaerobic cultures, were obtained from three sites: (1) the surgical scalpel immediately after skin incision; (2) the surface of the surgical tray where the instruments were placed at the end of the procedure; and (3) the hands and chest area of the surgeon's gown. Results: No early PJIs or bacterial growth was observed post-surgery. However, bacterial contamination was detected in 7 cases (4.7%), primarily in surgical trays. Cutibacterium acnes was identified in two TSA cases and one case each of TKA and THA. Other bacterial species detected included Staphylococcus hominis and Corynebacterium species. Additionally, Micrococcus luteus was found on the surgical gown of one TKA case. Contaminated cases showed significantly higher body weight (p ​= ​0.036) and longer surgery time (p ​= ​0.044) compared with non-contaminated cases. Conclusion: Maintaining an aseptic surgical environment, particularly in trays and gowns, is essential in preventing bacterial contamination, particularly C. acnes, during joint arthroplasty procedures.

Auto-inflammatory syndromes are rare diseases characterized by arthritis and joint destruction, symptoms similar to but distinct from rheumatoid arthritis (RA). Therapeutic targets have not been well characterized for auto-inflammatory syndromes, although the E3 ligase Synoviolin was previously shown to be a novel therapeutic target for RA. Here, we show that Synoviolin loss has little impact on a model of auto-inflammatory diseases. We previously established such a model, the hIL-1 cTg mouse, in which IL-1 signaling was constitutively activated, and animals exhibit symptoms recapitulating auto-inflammatory syndromes such as major joint dominant arthritis. Here, we crossed hIL-1 cTg with Synoviolin flox'd mice to yield hIL-1 cTg/Synoviolin cKO mice. Synoviolin gene expression was ablated in adult hIL-1 cTg/Synoviolin cKO mice by injection of pIpC to activate Mx1 promoter-driven Cre recombinase. However, symptoms seen in hIL-1 cTg mice such as arthritis and joint destruction were not alleviated by targeting Synoviolin, ruling out Synoviolin as a therapeutic target for auto-inflammatory disease. Our results indicate that although similar, RA and auto-inflammatory diseases are different diseases, and treatment strategies should differ accordingly.

Fatigue of the hip abductor muscles may influence lower limb biomechanics and potentially contribute to anterior cruciate ligament (ACL) injury risk. However, the effects of targeted hip abductor fatigue on trunk, pelvis and lower limb coordination during landing tasks remain unclear. The present study aimed to investigate how targeted hip abductor fatigue alters the biomechanics of the trunk, pelvis, and lower extremity during single-leg landing (SLL). Twenty healthy male recreational athletes performed SLL before and after a targeted hip abductor fatigue protocol. Kinematic and kinetic data were collected using a three-dimensional motion capture system and force plates, with analysis focused on the timing of peak vertical ground reaction force. Following fatigue, participants exhibited increased hip abduction angle and trunk right inclination, as well as decreased hip flexion and external hip abduction moment. Notably, the external knee abduction moment significantly increased post-fatigue, though it remained negative in absolute value. Increased pelvic left rotation was also observed, indicating compensatory adjustments in trunk-pelvis coordination. These adaptations indicate that targeted muscle fatigue induces complex biomechanical responses across the kinetic chain, rather than uniformly increasing injury risk through valgus-prone mechanics. While the observed changes may reflect stabilizing strategies under fatigue, their implications for ACL loading require further clarification. The current study highlights the relevance of considering whole-body biomechanical responses to targeted fatigue and contributes to a more detailed understanding of neuromuscular control during landing. These findings may support the refinement of injury prevention approaches that address segmental coordination under fatigued conditions.

Rheumatoid arthritis (RA) is a disease characterized by chronic joint inflammation, pain and joint destruction, leading to alteration in activities of daily living, yet pathological mechanisms underlying the condition are not fully clarified. To date, various therapeutic agents have been developed as RA therapy including DMARDs and/or biological agents that target inflammatory cytokines or inhibit JAK. Here we asked whether inhibiting signal transducer and activator of transcription 3 (Stat3) activity would antagonize RA. Stat3 forms dimers when activated and undergoes nuclear translocalization; thus we screened approximately 4.9 million small compounds as potential blockers of protein-protein interactions required for Stat3 dimerization using in silico screening. We identified 15 as strong candidates as potential blockers of protein-protein interactions required for Stat3 dimerization using in silico screening from those compounds. Four of the 15 significantly inhibited expression of IL-6 and RANKL, both of which are direct targets of Stat3, induced by IL-6. Among four, one compound, F0648-0027, significantly inhibited arthritis development without apparent adverse effects in vivo in collagen-induced arthritis model mice. F0648-0027 also significantly blocked Stat3 phosphorylation and nuclear localization following IL-6 stimulation of fibroblasts. These data suggest that Stat3 is a target for collagen-induced arthritis in mice, and that F0648-0027 could serve as a therapeutic reagent against comparable conditions in humans.

Background: Deterioration of physical function in middle-aged adults is a significant challenge that can lead to increased risk of future falls. However, a screening method for the functional decline in middle-aged adults has not been established. Research question: To evaluate the relationship between biomechanical parameters assessed by the timed up and go test (TUG) and locomotive syndrome (LS) in middle-aged adults. Methods: The inclusion criterion was: under 65 years of age. A total of 97 volunteers (mean age 51.1 years) participated in this study. An LS test was performed, including a 2-step test, a stand-up test, and a 25-question Geriatric Locomotive Function Scale. The TUG was measured using inertial measurement units (IMUs) at comfortable and fast speeds. We then determined the minimum values for anterior-posterior acceleration and angular velocity around the medial-lateral axis, as well as the maximum values of angular velocity around the vertical axis for the upper trunk and sacrum in a TUG phase. Results: Angular velocity around the vertical axis for upper trunk and sacrum were significantly smaller in LS than non-LS in the turn phase of both speed conditions. For the fast speed condition, the minimum anterior-posterior acceleration for sacrum was greater in LS than in the non-LS condition for the stand-to-sit phase. Angular velocity around the vertical axis for turning and anterior-posterior acceleration from sitting were associated with detection of LS. Significance: Turning and sitting movements during TUG should be observed using IMU to screen for physical function decline in middle aged adults.

The TightRope RT (Arthrex, Naples, FL) is a suspensory device for anterior cruciate ligament reconstruction. However, there is a potential risk of the button being pulled too far off the lateral femoral cortex into the soft tissue because the adjustable loop is long. The purpose of this article is to present an easy and safe technique for self-flip. As to the preparation of the graft, we draw the first line in the loop of the TightRope RT at the same length as the femoral tunnel, and we draw the second line 7 mm longer than the length of the femoral tunnel as a self-flip line. Concerning passing of the graft, the side sutures are pulled from the lateral side. We stop pulling the sutures just at the self-flip line by holding the graft at the tibial end. The side suture is inclined to the medial side with strong pulling of the suture at full extension of the knee. Then the surgeon pulls the tibial end of the graft to feel a secure positioning of the button on the lateral femoral cortex. Although it has limitations, the present technique is easy and certainly helps surgeons achieve appropriate positioning of the button.

Background: Wound condition after primary total knee arthroplasty (TKA) is an important issue to avoid any postoperative adverse events. Our purpose was to investigate and to clarify the important surgical factors affecting wound score after TKA. Methods: A total of 139 knees in 128 patients (mean 73 years) without severe comorbidity were enrolled in the present study. All primary unilateral or bilateral TKAs were done using the same skin incision line, measured resection technique, and wound closure technique using unidirectional barbed suture. In terms of the wound healing, Hollander Wound Evaluation Score (HWES) was assessed on postoperative day 14. We performed multiple regression analysis using stepwise method to identify the factors affecting HWES. Variables considered in the analysis were age, sex, body mass index (kg/m2), HbA1C (%), femorotibial angle (degrees) on plain radiographs, intraoperative patella eversion during the cutting phase of the femur and the tibia in knee flexion, intraoperative anterior translation of the tibia, patella resurfacing, surgical time (min), tourniquet time (min), length of skin incision (cm), postoperative drainage (ml), patellar height on postoperative lateral radiographs, and HWES. HWES was treated as a dependent variable, and others were as independent variables. Results: The average HWES was 5.0 ± 0.8 point. According to stepwise forward regression test, patella eversion during the cutting phase of the femur and the tibia in knee flexion and anterior translation of the tibia were entered in this model, while other factors were not entered. Standardized partial regression coefficient was as follows: 0.57 in anterior translation of the tibia and 0.38 in patella eversion. Conclusions: Fortunately, in the present study using the unidirectional barbed suture, major wound healing problem did not occur. As to the surgical technique, intraoperative patella eversion and anterior translation of the tibia should be avoided for quality cosmesis in primary TKA.

The purpose of the current study was to longitudinally evaluate how preoperative knee kinematics change after ACL reconstruction. Three-dimensional gait analysis using the point cluster method was undertaken on the same subjects preoperatively and at 3, 6, and 12 months after ACL reconstructive surgery. Thirteen subjects (7 males, 6 females) were examined while performing 2 different activities at self-selected speeds: walking and walk-pivoting (walking, pivoting toward the landed limb side and walking away). The contralateral knees of subjects at 12 months postoperatively were selected as control knees. Flexion range in the stance phase increased with time after surgery, but remained lower than in the contralateral knee, even at 12 months postoperatively (P <.05) during walking and walk-pivoting. The rotation pattern during walking and walk-pivoting showed an offset toward external rotation by 6 months postoperatively compared with control knees, while at 12 months postoperatively the offset had nearly disappeared and the movement pattern resembled that in control knees. These findings suggest that a return to sport participation by 6 months after ACL reconstruction requires careful consideration. Depending on the type of sport, activity restriction even after 12 months may need to be considered to allow complete kinematic restoration.

Purpose: Bone tunnel creation techniques influence the 3-dimensional (3D) position of bone tunnels and graft-bending angle in anterior cruciate ligament (ACL) reconstruction. This study assessed graft-bending angle and 3D characteristics of femoral bone tunnels and compared them between outside-in (OI) and transportal (TP) techniques. Methods: Participants comprised 64 patients who underwent anatomic double-bundle ACL reconstruction, allocated to OI and TP groups (n = 32 each). The graft orientation plane exhibiting the largest graft-bending angle at the femoral tunnel aperture with the knee in extension was reconstructed from CT data using 3D imaging software. In this plane, graft-bending angle was compared between the OI and TP techniques. Results: Although positionings of the intra-articular apertures of the femoral and tibial bone tunnels were similar, several spatial parameters of bone tunnels differed between techniques. Graft-bending angles of both anteromedial and posterolateral bundles were significantly more acute with the OI technique than with the TP technique. On coronal-plane CT, angle of the bone tunnel axis relative to the distal condylar axis correlated negatively with graft-bending angle, while in the axial plane, angle of the bone tunnel axis relative to the posterior condylar axis correlated positively with graft-bending angle. Lysholm score, pivot shift test, and anteroposterior laxity at >2.5-year follow-up demonstrated no significant differences between techniques. Discussion: Different bone tunnel directions in OI and TP techniques substantially affected graft-bending angle, despite similar positionings of the intra-articular apertures. Graft-bending angle with the OI technique was acute, but risk of posterior blowout of the lateral femoral condyle was decreased. Surgeons should create the femoral tunnel while considering an obtuse graft-bending angle without increasing the risk of posterior blowout. Level of evidence: III.