論文

Localized pigmented villonodular synovitis of the posterior knee compartment presents a surgical challenge due to limited arthroscopic access and the complex anatomy of the posterior knee. We describe a modified arthroscopic approach that enhances visualization and facilitates efficient resection by enlarging the posteromedial portal. This technique allows simultaneous use of the arthroscope and surgical instruments within the same portal, optimizing maneuverability and precision. The procedure involves careful portal placement, strategic use of a 70° arthroscope, and a combination of curettage, shaving, and radiofrequency ablation to achieve complete resection while minimizing iatrogenic injury. Compared to traditional approaches using both posteromedial and posterolateral portals, our method is less invasive yet provides adequate exposure for thorough lesion removal. Additionally, resection performed solely from anterior portals has been reported, but it frequently results in incomplete excision due to restricted access. This technique offers distinct advantages, including improved visualization, efficient instrument handling, and reduced operative time, making it particularly suitable for novice surgeons. By refining arthroscopic accessibility to the posterior knee compartment, this approach represents a safe, effective, and reproducible method for managing localized pigmented villonodular synovitis with minimal morbidity.

Background: Although various reconstruction techniques are available for anterior cruciate ligament (ACL) injuries, a long recovery time is required before patients return to sports activities, as the reconstructed ACL requires time to regain strength. To date, several studies have reported use of mesenchymal stem cells in orthopaedic surgery; however, no studies have used adipose-derived stem cell (ADSC) sheets in ACL reconstruction (ACLR). Hypothesis: ADSC sheet transplantation can improve biomechanical strength of the autograft used in ACLR. Study Design: Controlled laboratory study. Methods: A total of 68 healthy Japanese white rabbits underwent unilateral ACLR with a semitendinosus tendon autograft after random enrollment into a control group (no sheet; n = 34) and a sheet group (ADSC sheet; n = 34). At 2, 4, 8, 16, and 24 weeks after surgery, rabbits in each group were sacrificed to evaluate tendon-bone healing using histological staining, micro–computed tomography, and biomechanical testing. At 24 weeks, scanning transmission electron microscopy of the graft midsubstance was performed. Results: The ultimate failure load for the control and sheet groups, respectively, was as follows: 17.2 ± 5.5 versus 37.3 ± 10.3 (P =.01) at 2 weeks, 28.6 ± 1.9 versus 47.4 ± 10.4 (P =.003) at 4 weeks, 53.0 ± 14.3 versus 48.1 ± 9.3 (P =.59) at 8 weeks, 66.2 ± 9.3 versus 95.2 ± 43.1 (P =.24) at 16 weeks, and 66.7 ± 27.3 versus 85.3 ± 29.5 (P =.39) at 24 weeks. The histological score was also significantly higher in the sheet group compared with the control group at early stages up to 8 weeks. On micro–computed tomography, relative to the control group, the bone tunnel area was significantly narrower in the sheet group at 4 weeks, and the bone volume/tissue volume of the tendon-bone interface was significantly greater at 24 weeks. Scanning transmission electron microscopy at 24 weeks indicated that the mean collagen fiber diameter in the midsubstance was significantly greater, as was the occupation ratio of collagen fibers per field of view, in the sheet group. Conclusion: ADSC sheets improved biomechanical strength, prevented bone tunnel enlargement, and promoted tendon-bone interface healing and graft midsubstance healing in an in vivo rabbit model. Clinical Relevance: ADSC sheets may be useful for early tendon-bone healing and graft maturation in ACLR.

Background: The effects of anterior cruciate ligament (ACL) reconstruction on postoperative gait biomechanics remain controversial, and the influence of meniscus pathology on pre- and post-ACL reconstruction biomechanical changes has not yet been studied. Here, we aimed to clarify the difference in knee joint moment between pre- and post-ACL reconstruction conditions in subjects with and without meniscal pathology. Methods: Twenty-four subjects with unilateral ACL reconstruction injuries participated in this study. A total of 13 of the subjects had concomitant meniscus injuries. Gait analysis was performed preoperatively and at 11 months postoperatively. Three-dimensional knee joint angles and moments were calculated based on motion-capture data. The total joint moment and contribution of individual moments during the stance phase were assessed. For statistical analysis, we compared pre- and postoperative alterations, and differences were assessed in subjects with and without meniscal pathology. Results: Tibial rotation excursion was lower in subjects with meniscal pathology than in those with intact menisci postoperatively. An significant increase in the contribution of the knee flexion moment and a significant decrease in the contribution of the knee adduction moment postoperatively were observed in subjects with intact menisci. Conclusions: Patients with ACL injury showed different postoperative alterations in joint moments depending on the concomitant meniscal injury.

Direct measurement of cartilage stiffness provides useful clinical information and enables us to develop treatment strategies for patients. We applied an indentation sensor to evaluate cartilage stiffness under arthroscopic control. The purpose of this study was to validate the arthroscopic indentation sensor using cadaver knees and to measure cartilage stiffness in clinical cases. The stiffness of a material with known properties was measured at thicknesses from 2 mm to 10 mm with a 2-mm interval. This was repeated three times at each thickness to evaluate repeatability. The articular cartilage stiffness of the medial and lateral femoral condyles of five human cadaveric knees was measured. The sensor was inclined from 0° to 20° with 1° intervals. The stiffness value at each degree of inclination was compared to evaluate the acceptable measuring angle. Additionally, articular cartilage stiffness was measured in 23 adolescent and 11 adult patients under arthroscopy. Young’s moduli of the material were 1.15–1.24 (mean 1.20) MPa. Inter-class correlation coefficients in repeated measurements using the material were 0.83–0.99. There were no differences in the cartilage stiffness between the medial and lateral femoral condyles of the cadaver knees. All condyles showed a nonlinear relationship between force and displacement. The force decreased in all condyles when the tip of the sensor system was tilted. The range of error was < 97.1% within 5° inclination. There was a moderate negative correlation between age and cartilage stiffness in adolescent patients, and a moderate positive correlation in adult patients. Since the sensor system is manually held during measurement, the validity and repeatability to assess material properties of the cartilage may be inaccurate. This study has proven that the instrument can measure the stiffness of joint cartilage reliably and is a useful clinical tool under arthroscopic control.

Background: Risk for non-contact anterior cruciate ligament (ACL) injury can be assessed based on drop vertical jump (DVJ). However, biomechanics of DVJ may differ with various sporting activities. The purpose of the present study was to clarify whether biomechanical features of DVJ are different among various sporting activities in female athletes. Methods: A total of 42 female athletes, including 25 basketball, 8 soccer and 9 volleyball players, participated in the current investigation. DVJ was done for each female athlete using a three-dimensional motion analysis system which consisted of six cameras, two force plates and 46 retro-reflective markers. Kinematic and kinetic data were recorded for both limbs in each athlete. Simultaneously, frontal and sagittal plane views of the DVJ were recorded using two different high-resolution video cameras to evaluate Landing Error Scoring System (LESS) score. Three-dimensional biomechanical parameters at the knee joint and LESS were compared among three different sporting activities using ANOVA or Kruskal–Wallis test after confirming normality assumption. Thereafter post hoc Tukey or Steel–Dwass was utilized for multiple comparison. Results: Soccer players had better LESS score, and peak knee flexion angle was significantly larger in soccer players compared to the other sports. In addition, knee abduction angle at initial contact (IC), peak knee abduction angle, knee internal rotation angle, and knee abduction moment within 40 ms from IC were significantly smaller in soccer players, compared to basketball players. In terms of volleyball players, knee abduction angle at IC and knee internal rotation angle at IC were significantly larger than soccer players, whereas no significant biomechanical differences were found between basketball and volleyball players. Conclusions: From the present study, female basketball and volleyball players have worse LESS score, smaller peak knee flexion angle, greater knee abduction angle at IC and greater knee internal rotation angle at IC, compared to female soccer players. Thus, female basketball and volleyball players may have an increased risk of non-contact ACL injury during the jump-landing task, compared to soccer players. Biomechanics of DVJ depends on characteristics of the athlete's primary sport.

Background: Mechanical overload applied on the articular cartilage may play an important role in the pathogenesis of osteoarthritis. However, the mechanism of chondrocyte mechanotransduction is not fully understood. The purpose of this study was to assess the effects of compressive mechanical stress on interleukin-1 receptor (IL-1R) and matrix-degrading enzyme expression by three-dimensional (3D) cultured ATDC5 cells. In addition, the implications of transient receptor potential vanilloid 4 (TRPV4) channel regulation in promoting effects of compressive mechanical loading were elucidated. Methods: ATDC5 cells were cultured in alginate beads with the growth medium containing insulin-transferrin-selenium and BMP-2 for 6 days. The cultured cell pellet was seeded in collagen scaffolds to produce 3D-cultured constructs. Cyclic compressive loading was applied on the 3D-cultured constructs at 0.5 Hz for 3 h. The mRNA expressions of a disintegrin and metalloproteinases with thrombospondin motifs 4 (ADAMTS4) and IL-1R were determined with or without compressive loading, and effects of TRPV4 agonist/antagonist on mRNA expressions were examined. Immunoreactivities of reactive oxygen species (ROS), TRPV4 and IL-1R were assessed in 3D-cultured ATDC5 cells. Results: In 3D-cultured ATDC5 cells, ROS was induced by cyclic compressive loading stress. The mRNA expression levels of ADAMTS4 and IL-1R were increased by cyclic compressive loading, which was mostly prevented by pyrollidine dithiocarbamate. Small amounts of IL-1β upregulated ADAMTS4 and IL-1R mRNA expressions only when combined with compressive loading. TRPV4 agonist suppressed ADAMTS4 and IL-1R mRNA levels induced by the compressive loading, whereas TRPV4 antagonist enhanced these levels. Immunoreactivities to TRPV4 and IL-1R significantly increased in constructs with cyclic compressive loading. Conclusion: Cyclic compressive loading induced mRNA expressions of ADAMTS4 and IL-1R through reactive oxygen species. TRPV4 regulated these mRNA expressions, but excessive compressive loading may impair TRPV4 regulation. These findings suggested that TRPV4 regulates the expression level of IL-1R and subsequent IL-1 signaling induced by cyclic compressive loading and participates in cartilage homeostasis.

Background: Although unloading of the joint is related to reduction of the local bone mineral density (BMD), little attention had been paid to the relationship between loading asymmetry and side-to-side difference of BMD in patients with bilateral knee osteoarthritis (OA). The aim of the present study was to evaluate and clarify the relationship between gait parameters and bone mineral density in those patients. Methods: A total of 36 knees in eighteen patients (mean age = 73.7 ± 6.3 years, mean body mass index = 26.7 ± 3.8 kg/m2) with bilateral medial knee OA were enrolled in the present study. All subjects performed relaxed standing and level walking at our gait laboratory after informed consent was obtained. First, ground reaction force was calculated on bilateral knees during standing. The knees in each patient were divided into higher and lower force side for the definition of dominant side limb. Second, gait parameters in each subject were obtained. To analyze the factors that affect the weight-bearing distribution in both limbs, clinical data and biomechanical parameters were compared between knees. Clinical data included radiographic OA grade, femorotibial angle, and BMD at the bilateral femoral neck. Results: Knees on higher force side were significantly more extended than on lower force side in standing (P = 0.012) and knee excursion during weight acceptance phase in gait was significantly larger in higher side than in lower side (P = 0.006), while the other parameters were not significantly different. As to the clinical data, higher force side had greater BMD, compared to lower force side. In terms of Kellgren–Lawrence scale and femorotibial angle on plain radiographs, there were no significant differences between higher and lower force side. Conclusions: Based on loading asymmetry in the present study, lower BMD was observed on Lower force side in patients with knee OA. Therefore, it is helpful for orthopedic surgeons to examine side-to-side differences of bone mineral density or extension limitation during standing for evaluation of the loading condition in patients with bilateral knee OA.

Purpose: The external knee adduction moment (KAM) during gait is an important mechanical factor for knee osteoarthritis (KOA). Three-dimensional motion capture (MoCap) has been used to measure KAM, but it has limitations including cost, measuring time, and space. The purpose of this study was to develop a simple and wearable system to estimate KAM. Methods: Thirty-nine female and seven male subjects diagnosed with KOA were included. Simultaneous measurements of 5 ​m walk using MoCap and inertial measurement unit (IMU) attached to the knee were performed, and a deep learning algorithm based on a gait phase detection algorithm and one-dimensional convolutional neural network model was used to estimate KAM. In addition, the reliability of the artificial intelligence system was also evaluated. Results: The mean absolute percent error (MAPE) and mean absolute error (MAE) of estimated KAM peak of the training data and test datasets were 13.0% and 0.0428 Nm.s/(BW∗Ht) and 17.3% and 0.0505 Nm.s/(BW∗Ht), respectively, and those of estimated KAM impulse were 20.4% and 0.0214 Nm.s/(BW∗Ht) and 21.4% and 0.0212 Nm.s/(BW∗Ht), respectively. The Pearson correlation coefficients between estimated KAM (peak, impulse) and MoCap KAM (peak, impulse) were 0.870 and 0.975 in the training dataset and 0.591 and 0.690 in the test dataset. The intraclass correlation coefficients (ICCs) of estimated KAM impulse were 0.83, 0.94, 0.70, and 0.82 for ICCs (1.1), (1,k), (2,1), and (2,k) respectively. Conclusions: The wearable system showed reasonable accuracy and reliability in estimating KAM of KOA during gait. The simple equipment in the system enables the measurement of KAM during daily practice in the clinic or hospital if there is available space to walk 5 ​m.

Background: Implant design is important for achieving proper knee biomechanics during gait following knee arthroplasty. Bicruciate-stabilized total knee arthroplasty attempts to replicate anterior stability and rotational facilitation. However, its detailed gait biomechanics compared with other implant designs have not been analyzed. The purpose of this study is to compare knee kinematics and kinetics between bicruciate-stabilized total knee arthroplasty, posterior-stabilized total knee arthroplasty, unicompartmental knee arthroplasty, and normal knees. Methods: Ten healthy subjects, 16 who underwent posterior stabilized total knee arthroplasty, 12 who underwent bicruciate-stabilized total knee arthroplasty, and 13 who underwent unicompartmental knee arthroplasty were recruited. The mean follow-up period after arthroplasty was 11.0 months. Three-dimensional kinematics and kinetics were assessed using a motion capture system with subjects walking on a 5-m walkway. Comparisons between groups were conducted using the Kruskal–Wallis test, and post hoc analysis was performed for those parameters that differed significantly. Findings: The bicruciate-stabilized total knee arthroplasty group showed decreased internal rotation compared to the unicompartmental knee arthroplasty group. Compared to the control group, the posterior-stabilized total knee arthroplasty group exhibited reduced knee extension and internal rotation moment. Interpretation: Bicruciate-stabilized total knee arthroplasties exhibited different biomechanical characteristics compared to unicompartmental knee arthroplasties during terminal stance. Postoperative total knee arthroplasty rehabilitation should focus on relieving stiffness owing to insufficient knee flexion-extension motion observed in both bicruciate-stabilized and posterior-stabilized total knee arthroplasties compared with unicompartmental knee arthroplasty, which may be due to a lack of knee rotational motion during gait.

Background: Knot tying technique is an extremely important basic skill for all surgeons. Clinically, knot slippage or suture breakage will lead to wound complications. Although some previous studies described the knot-tying technique of medical students or trainees, little information had been reported on the knot-tying technique of instructors. The objective of the preset study was to assess surgeons’ manual knot tying techniques and to investigate the differences of tensile strength in knot tying technique between surgical instructors and trainees. Methods: A total of 48 orthopaedic surgeons (postgraduate year: PGY 2–18) participated. Surgeons were requested to tie surgical knots manually using same suture material. They were divided into two groups based on each career; instructors and trainees. Although four open conventional knots with four throws were chosen and done with self-selected methods, knot tying practice to have the appropriate square knots was done as education only for trainees before the actual trial. The knots were placed over a 30 cm long custom made smooth polished surface with two cylindrical rods. All knots were tested for tensile strength using a tensiometer. The surgical loops were loaded until the knot slipped or the suture broke. The tensile strength of each individual knot was defined as the force (N) required to result in knot failure. Simultaneously, knot failure was evaluated based on knot slippage or suture rupture. In terms of tensile strength or knot failure, statistical comparison was performed between groups using two-tailed Mann–Whitney U test or Fisher exact probability test, respectively. Results: Twenty-four instructors (PGY6–PGY18) and 24 trainees (PGY2–PGY5) were enrolled. Tensile strength was significantly greater in trainees (83.0 ± 27.7 N) than in instructors (49.9 ± 34.4 N, P = 0.0246). The ratio of slippage was significantly larger in instructors than in trainees (P < 0.001). Knot slippage (31.8 ± 17.7 N) was significantly worse than suture rupture (89.9 ± 22.2 N, P < 0.001) in tensile strength. Conclusions: Mean tensile strength of knots done by trainees after practice was judged to be greater than that done by instructors in the present study. Clinically, knot slippage can lead to wound dehiscence, compared to suture rupture.

Background: Long-leg alignment and joint line obliquity have traditionally been assessed using two-dimensional (2D) radiography, but the accuracy of this measurement has remained unclear. This study aimed to evaluate the accuracy of 2D measurements of lateral distal femoral angle (LDFA) and medial proximal tibial angle (MPTA) using upright three-dimensional (3D) computed tomography (CT). Methods: This study involved 66 knees from 38 patients (34 women, four men) with knee osteoarthritis (OA), categorized by Kellgren–Lawrence (KL) grade. Patients underwent standing long-leg radiography (LLR) and upright CT. Flexion and rotation angles of the femur and tibia were measured from upright CT data, and knees were classified by coronal plane alignment of the knee (CPAK) according to 2D- and 3D-LDFA/MPTA. Results: Overall, as KL grade increased, femoral external rotation and flexion increased significantly (P < 0.05). Regarding the tibia, flexion increased (P < 0.05) while rotation remained unchanged with increasing KL grade. In mild OA (KL1 or KL2), 2D-LDFA (86.5 ± 1.8°) was significantly larger than 3D-LDFA (85.0 ± 2.5°; P < 0.05), and this difference was also observed in severe OA (KL3 or KL4) (88.7 ± 2.5° vs. 87.7 ± 3.2°; P < 0.05). However, MPTA was comparable between 2D and 3D. The consistency between 2D and 3D CPAK classifications was 48.5% for the entire sample, 25.0% for mild OA, and 61.9% for severe OA. Conclusion: Based on 3D-LDFA/MPTA data gained from upright CT, 2D radiographic LDFA tended to be inaccurate, which may significantly affect the CPAK classification.

The dual task is an important factor affecting knee biomechanics during jump-landing tasks. Athletes often have trouble in performing two tasks concurrently and a dual task can deteriorate landing performance. However, it is still unknown whether a dual task will affect the entire lower extremity. The purpose of this study was to clarify the effects of cognitive task interference on biomechanics of hip and ankle joints as well as the knee joint during the drop vertical jump (DVJ). A total of 20 female collegiate athletes participated in the study. Athletes performed a DVJ with or without a cognitive task. The DVJ was captured using a motion analysis system. Mental arithmetic of 2-digit addition was used as a cognitive task. Maximum vertical ground reaction force (vGRF), joint angles at initial contact (IC), joint moments within 40 milliseconds (ms) after IC, and joint angles and moments at peak vGRF were assessed. The data were statistically compared between with and without a cognitive task condition using a two-tailed paired t-test or the Wilcoxon singed rank test. The peak external knee abduction moment on both limbs within 40 ms after IC during the DVJ was significantly larger in the dual task than in the single task with less knee and hip flexion at initial contact. In addition, all moments of hip and ankle joints within 40 ms after IC were significantly larger in the dual task than in the single task accompanied with greater vGRF, except for the hip internal rotation moment. Cognitive tasks during a DVJ will result in biomechanical changes of the entire lower extremity in female athletes.

Purpose: Foot progression angle is a key factor for biomechanical knee load, which is associated with noncontact anterior cruciate ligament (ACL) injury during sports-specific tasks. The purpose of the present study was to assess the biomechanics of trunk, pelvis, and lower extremities during a cutting maneuver under different foot progression angles. Methods: Nineteen male collegiate athletes (ages 18–24) participated in the present study. Cutting motion was analyzed using eight infrared cameras (250 Hz), two force plates (1250 Hz), and 44 reflective markers. Subjects performed 45-degree side cutting maneuvers under three foot progression angles, including 20 degrees (toe-out: TO), 0 degrees (neutral: TN), and − 20 degrees (toe-in: TI). Peak values of each biomechanical parameters in trunk, pelvis, hip, and knee within a first 40% stance phase and each parameter at the timing of the peak vertical ground reaction force were assessed. A statistical analysis was performed to compare data among the three-foot progression angles using the Friedman test. Results: Peak angles of knee abduction, tibial internal rotation, hip internal rotation, and hip adduction were significantly greater for TI position than for TO position (p < 0.01). Peak moments of knee abduction and tibial internal rotation under TI position were also significantly larger than TO position (p < 0.01). Moreover, greater peak pelvis-trunk rotation was found for TI position than for TN and TO positions (p < 0.01). Conclusion: From the present study, TI position could lead to an increased risk of ACL injury during a pre-planned cut maneuver, compared to TO position.

Visual information is crucial for motor control during a jump-landing, allowing for anticipation of landing timing and prediction of the impact. However, the effects of visual occlusion on lower extremity biomechanics are not well understood. To investigate this, we studied the impact of visual occlusion on motor control during a low-intensity single-leg landing. Seventeen female college students participated in the controlled laboratory investigation. They performed low-intensity repetitive vertical hopping on a single leg under eyes-open (EO) and eyes-closed (EC) conditions. Main outcome measurements were taken, including jump height, ground reaction forces, joint angles, and joint moments, using a motion capture system. The significant effects of visual occlusion were as follows: 1) a decrease in the hip flexion angle at ground contact (p = 0.02), 2) an increase in Fx (medio-lateral ground reaction force), knee valgus, and internal rotation angles in the early phase within 80 ms after ground contact (p < 0.05), and 3) an increase in Fz (vertical ground reaction force) and a reduction in hip and knee flexion angles at peak Fz (p < 0.05). The amount of angular change at the ankle joint correlated with the hip and knee joints only under the EC condition (p < 0.05). These changes indicate modifications in landing strategy for safety and/or deficiencies in control for an efficient and accurate landing. In conclusion, visual information contributes to safe and accurate motor control during low-intensity landing movements.

Although the external knee adduction moment (KAM) during gait was shown to be a quantitative parameter of medial knee osteoarthritis (OA), it requires expensive equipment and a dedicated large space to measure. Therefore, it becomes a major reason to limit KAM measurement in a clinical environment. The purpose of this study was to estimate KAM using a single inertial measurement unit (IMU) during gait in patients with knee OA. A total of 22 medial knee OA patients (44 knee joints) performed conventional gait analysis using three-dimensional (3D) motion capture system. At the same time, we attached commercial IMUs to six body segments (sternum, pelvis, both thighs, and both shanks), and IMU signals during gait were recorded synchronized with the motion capture system. The peak-to-peak difference of acceleration in the lateral/medial axis immediately after heel contact was defined as the thrust acceleration (TA). We hypothesized that TA would represent the lateral thrust of the knee during the stance phase and correlate with the first peak of KAM. The relationship between the peak KAM and TA of pelvis (R = 0.52, p < 0.001), shanks (R = 0.57, p < 0.001) and thighs (R = 0.49, p = 0.001) showed a significant correlation. The root mean square error (RMSE) of linear regression models of pelvis, shanks, and thighs to estimate KAM were 0.082, 0.079, and 0.084 Nm/kg*m, respectively. Our newly established parameter TA showed a moderate correlation with conventional KAM. The current study confirmed our hypothesis that a single IMU would predict conventional KAM during gait. Since KAM is known as an indicator for prognosis and severity of knee OA, this new parameter has the potential to become an accessible predictor for medial knee OA instead of KAM.

Objective: This study is to investigate the three-dimensional (3D) kinematic changes in the knee joint in patients with recurrent patellar dislocation using four-dimensional computed tomography (4DCT) imaging and the 3D-3D surface registration technique. Materials and methods: Ten knees from nine patients with recurrent patellar dislocation and seven knees from seven controls (unaffected side of patients with unilateral anterior cruciate ligament injury) were analyzed using 4DCT. The patients were asked to extend their knees from 60° of flexion to full extension for 10 s in the CT gantry. We used the 3D-3D registration technique, and the 3D angles of the patella and tibia relative to the femur were evaluated. Results: In the dislocation group, the patellar lateral tilt increased as the knee extended. Significant differences were found between the two groups at 0°–20° of knee flexion. The tibia rotated externally as the knee extended in the dislocation group. Significant differences between the two groups were found at 0°–10° of knee flexion. Conclusion: This study demonstrated significant differences in the timing and magnitude of tibial external rotation between patients with recurrent patellar dislocation and controls. Specifically, the tibia began to externally rotate during the early phase of knee extension in the dislocation group. These findings provide new insights into knee kinematics that may inform future treatment strategies for patellar dislocation.

Background: Although fatigue is known as one of the risk factors for noncontact anterior cruciate ligament injury, the effects of fatigue and recovery can be different based on the level of competition. However, it is unknown whether female recreational athletes are susceptible to fatigue or not, compared to female collegiate athletes with greater physical activity. The purpose of the present study was to examine and clarify the effects of fatigue and recovery on knee biomechanics of the drop vertical jump (DVJ) in female recreational athletes compared to female collegiate athletes. Methods: Fifteen female collegiate athletes and ten female recreational athletes were enrolled in the current study. All subjects were basketball players and Tegner activity scales were level 9 and 7, respectively. They performed DVJ before and after the fatigue protocol. Three-dimensional knee kinematics and kinetics were collected during landing phase of DVJ. The data after the fatigue protocol (first, second, and third DVJs) were compared with those before the protocol using one-way repeated measures of analysis of variance in each group. Results: Fatigue caused significant increase of knee abduction angle at initial contact (IC) and peak abduction moments within 40 ms from IC in female recreational athletes, whereas no increases of these parameters were observed in female collegiate athletes. Moreover, recovery from fatigue seemed to be more slowly in female recreational athletes than in female collegiate athletes as smaller knee flexion moment was observed even in post-fatigue third DVJ only for female recreational athletes. Conclusions: Effects of fatigue on DVJ were significantly greater and continued for a longer duration in female recreational athletes compared to female collegiate athletes.

Objective: The tibia externally rotates to the femur during the last 20° of the knee extension motion. This kinematic phenomenon is well known as screw home movement (SHM). The purpose was to clarify the SHM in anterior cruciate ligament deficient (ACLD) knee using four-dimensional computed tomography (4DCT). Materials and methods: Six patients with a unilateral isolated ACLD knee participated. In the static position, CT scan of the both limbs of the femur and tibia were performed. Then, 4DCT was performed around knee. In the CT gantry, subjects were positioned in supine position with 45° of knee flexion on a triangle pillow and were asked to extend the knee to full extension within 10 s on each limb. The CT data were accumulated in digital imaging and communication in medicine (DICOM) data format. From the static CT and 4DCT DICOM data, three-dimensional surfaces of the knee joint were reconstructed. The whole tibia surface was matched into the partial tibia surface of that frame using 3D-3D registration technique. After the assessment of coordination system of the whole leg, knee flexion, abduction, and external rotation angle were calculated. Results: Knee external rotation angle was significantly smaller on the ACLD side than on the contralateral unaffected side in 0–15° of knee flexion (P < 0.05 in 0, 5, 10, and 15 degrees), while the angle was similar during 15–60° of knee flexion. Conclusion: The absence of SHM in ACLD knee was detected using 3D-3D registration technique based on 4DCT.

Background: Surgical techniques related to soft tissue management play critical roles in optimizing surgical outcomes and patient satisfaction in total knee arthroplasty (TKA). Despite the importance of wound closure and bleeding management approaches, no published guidelines/consensus are available. Methods: Twelve orthopedic surgeons participated in a modified Delphi panel consisting of 2 parts (each part comprising two rounds) from September–October 2018. Questionnaires were developed based on published evidence and guidelines on surgical techniques/materials. Questionnaires were administered via email (Round 1) or at a face-to-face meeting (subsequent rounds). Panelists ranked their agreement with each statement on a five-point Likert scale. Consensus was achieved if ≥70% of panelists selected 4/5, or 1/2. Statements not reaching consensus in Round 1 were discussed and repeated or modified in Round 2. Statements not reaching consensus in Round 2 were excluded from the final consensus framework. Results: Consensus was reached on 13 goals of wound management. Panelists agreed on 38 challenges and 71 strategies addressing surgical techniques or wound closure materials for each tissue layer, and management strategies for blood loss reduction or deep vein thrombosis prophylaxis in TKA. Statements on closure of capsular and skin layers, wound irrigation, dressings and drains required repeat voting or modification to reach consensus. Conclusion: Consensus from Asia-Pacific TKA experts highlights the importance of wound management in optimizing TKA outcomes. The consensus framework provides a basis for future research, guidance to reduce variability in patient outcomes, and can help inform recommendations for wound management in TKA.

Background: The classification of knee osteoarthritis is an essential clinical issue, particularly in terms of diagnosing early knee osteoarthritis. However, the evaluation of three-dimensional limb alignment on two-dimensional radiographs is limited. This study evaluated the three-dimensional changes induced by weight-bearing in the alignments of lower limbs at various stages of knee osteoarthritis. Methods: Forty five knees of 25 patients (69.9 ± 8.9 years) with knee OA were examined in the study. CT images of the entire leg were obtained in the supine and standing positions using conventional CT and 320-row detector upright CT, respectively. Next, the differences in the three-dimensional alignment of the entire leg in the supine and standing positions were obtained using 3D-3D surface registration technique, and those were compared for each Kellgren–Lawrence grade. Results: Greater flexion, adduction, and tibial internal rotation were observed in the standing position, as opposed to the supine position. Kellgren–Lawrence grades 1 and 4 showed significant differences in flexion, adduction, and tibial internal rotation between two postures. Grades 2 and 4 showed significant differences in adduction, while grades 1 and 2, and 1 and 3 showed significant differences in tibial internal rotation between standing and supine positions. Conclusions: Weight-bearing makes greater the three-dimensional deformities in knees with osteoarthritis. Particularly, greater tibial internal rotation was observed in patients with grades 2 and 3 compared to those with grade 1. The greater tibial internal rotation due to weight-bearing is a key pathologic feature to detect early osteoarthritic change in knees undergoing osteoarthritis.