論文

Blue phases (BPs) consist of three-dimensional self-assembled structures formed by a double-twisted columnar arrangement of liquid crystal molecules. Although their unique optical and structural properties render BPs particularly useful for applications such as liquid crystal displays, BPs typically appear in a narrow temperature range between the isotropic and nematic phases. This thermodynamic instability impedes their practical applicability. However, the simulations we present here showed that, in a quasi-one-dimensional system confined to nanospace, a phase equivalent to the BP appears and persists between the nematic and smectic phases. Confinement to a nanotube (NT) with a relatively small radius enables the BP to be maintained over a wide temperature range, whereas for an NT with a relatively larger radius, the BP appears only in a very narrow temperature range between the aforementioned phases. We additionally showed that the pitch of the BP is dependent on and can be controlled by adjusting the radius of the NTs. This finding has significant implications for the potential application of these materials in fields such as photonics and chiral separation technologies.

There is a clear relationship between the self-assembling architecture of nanoparticles (NPs) and their physical properties, and they are currently used in a variety of applications, including optical sensors. Polymer-tethered NPs, which are created by grafting polymers onto NPs to control the self-assembly of NPs, have attracted considerable attention. Recent synthetic techniques have made it possible to synthesize a wide variety of polymers and thereby create NPs with many types of surfaces. However, self-assembled structures have not been systematically classified because of the large number of tuning parameters such as the polymer length and graft density. In this study, by using coarse-grained molecular simulation, we investigated the changes in the self-assembled structure of polymer-tethered NP solutions confined in nanotubes due to the chemical properties of polymers. Three types of tethered polymer NP models were examined: homo hydrophilic, diblock hydrophilic-hydrophobic (HI-HO), and diblock hydrophobic-hydrophilic. Under strong confinement, the NPs were dispersed in single file at low axial pressure. As the pressure increased, multilayered lamellar was observed in the HI-HO model. In contrast, under weak confinement, the difference in the pressure at which the phases emerge, depending on the model, was significant. By changing the chemical properties of the grafted polymer, the thermodynamic conditions (the axial pressure in this study) under which the phases appear is altered, although the coordination of NPs remains almost unchanged. Our simulation offers a theoretical guide for controlling the morphologies of self-assembled polymer-tethered NPs, a novel system that may find applications in nanooptical devices or for nanopatterning.

The ice–rubber interface is critical in applications such as tires and shoe outsoles, yet its molecular tribology remains unclear. Using all-atom molecular dynamics simulations, we studied premelting layers at the basal face of ice in contact with styrene–butadiene rubber from 254 to 269 K. Despite its hydrophobicity, rubber enhanced the structural disorder of interfacial water, promoting premelting. In contrast, water mobility was suppressed by confinement from polymer chains, leading to glassy dynamics distinct from that of the ice–vapor interface. Near the melting point, rubber chains became more flexible and penetrated the premelting layer, forming a mixed rubber–water region that couples the dynamics of both components. These results suggest that nanoscale roughness and morphology of hydrophobic polymers disrupt ice hydrogen-bond networks, thereby enhancing premelting. Our findings provide molecular-level insight into ice slipperiness and inform the design of polymer materials with controlled ice adhesion and friction.

In this study, a coarse-grained molecular simulation was performed to investigate the morphologies and phase diagrams of self-assembled polymer-tethered nanoparticles (NPs) confined in nanotubes (NTs). Unlike ordinary NPs, polymer-tethered NPs have two distinct characteristic lengths, which are key factors that determine their self-assembly. Herein, two distinct types of NT walls and three types of polymer-tethered NPs were considered: hydrophilic and hydrophobic walls, and hydrophilic, hydrophobic, and Janus surfaces. First, the qualitative phase diagrams of the axial pressure,Pz,versusthe ratio of the NT radius to the NP radius,L, were derived. The results revealed that diverse self-assembled morphologies, which are not formed in non-tethered NPs, were observed in the polymer-tethered NPs. For example, three types of ordered structures with different structural characteristic lengths, depending onPz, were obtained. In addition, the effect of the chemical nature of the polymer-tethered NP surface on the self-assembled morphology confined in NTs was investigated. Clusters of water molecules were formed, particularly in the hydrophobic polymer-tethered NPs, and these clusters caused the structural distortion of the NP. Moreover, in the polymer-tethered NPs with the Janus amphiphilic surface, the hydrophobic and hydrophilic polymer tethered NPs assembled in the axial direction to form an ordered structure, and a double-helix structure was formed atL= 3.0 in the hydrophobic NT. The results of these simulations indicate that the self-assembly behaviours of polymer-tethered NPs can be qualitatively predicted based on the chemical nature of the NT walls and the surface design of the polymer-tethered NP.

Nanoparticles exhibit diverse self-assembly attributes and are expected to be applicable under unique settings. For instance, biomolecules can be sandwiched between dimer nanoparticles and detected by surface-enhanced Raman scattering. Controlling the gap between extremely close dimers and stably capturing the target molecule in the gap are crucial aspects of this strategy. Therefore, polymer-tethered nanoparticles (PTNPs), which show promise as high-performance materials that exhibit the attractive features of both NPs and polymers, were targeted in this study to achieve stable biomolecule sensing. Using coarse-grained molecular dynamics simulations, the dependence of the PTNP interactions on the length of the grafted polymer, graft density, and coverage ratio of a hydrophobic tether were examined. The results indicated that the smaller the tether length and graft density, the smaller was the distance between the PTNP surfaces ((Formula presented.)). In contrast, (Formula presented.) decreased as the coverage ratio of the hydrophobic surface ((Formula presented.)) increased. The sandwiching probability of the sensing target increased in proportion to the coverage ratio. At high (Formula presented.) values, the PTNPs aggregated into three or more particles, which hindered their sensing attributes. These results provide fundamental insight into the sensing applications of NPs and demonstrate the usefulness of PTNPs in sensing biomolecules.