論文

Thin-film flows of viscoelastic fluids are encountered in various industrial and biological settings. The understanding of thin viscous film flows in Newtonian fluids is very well developed, which for a large part is due to the so-called thin-film equation. This equation, a single partial differential equation describing the height of the film, is a significant simplification of the Stokes equation effected by the lubrication approximation which exploits the thinness of the film. There is no such established equation for viscoelastic fluid flows. Here we derive the thin-film equation for a second-order fluid, and use it to study the classical Landau–Levich dip-coating problem. We show how viscoelasticity of the fluid affects the thickness of the deposited film, and address the discrepancy on the topic in literature.

Long and slender liquid filaments are produced during inkjet printing, which can subsequently either retract to form a single droplet, or break up to form a primary droplet and one or more satellite droplets. These satellite droplets are undesirable since they degrade the quality and reproducibility of the print, and lead to contamination within the enclosure of the print device. Existing strategies for the suppression of satellite droplet formation include, among others, adding viscoelasticity to the ink. In the present work, we aim to improve the understanding of the role of viscoelasticity in suppressing satellite droplets in inkjet printing. We demonstrate that very dilute viscoelastic aqueous solutions ( wt. polyethylene oxide, corresponding to nozzle Deborah number) can suppress satellite droplet formation. Furthermore, we show that, for a given driving condition, upper and lower bounds of polymer concentration exist, within which satellite droplets are suppressed. Satellite droplets are formed at concentrations below the lower bound, while jetting ceases for concentrations above the upper bound (for fixed driving conditions). Moreover, we observe that, with concentrations in between the two bounds, the filaments retract at velocities larger than the corresponding Taylor-Culick velocity for the Newtonian case. We show that this enhanced retraction velocity can be attributed to the elastic tension due to polymer stretching, which builds up during the initial jetting phase. These results shed some light on the complex interplay between inertia, capillarity and viscoelasticity for retracting liquid filaments, which is important for the stability and quality of inkjet printing of polymer solutions.

Drop coalescence occurs through the rapid growth of a liquid bridge that connects the two drops. At early times after contact, the bridge dynamics is typically self-similar, with details depending on the geometry and viscosity of the liquid. In this paper we analyse the coalescence of two-dimensional viscous drops that float on a quiescent deep pool; such drops are called liquid lenses. The analysis is based on the thin-sheet equations, which were recently shown to accurately capture experiments of liquid lens coalescence. It is found that the bridge dynamics follows a self-similar solution at leading order, but, depending on the large-scale boundary conditions on the drop, significant corrections may arise to this solution. This dynamics is studied in detail using numerical simulations and through matched asymptotics. We show that the liquid lens coalescence can involve a global translation of the drops, a feature that is confirmed experimentally.

The dip-coating geometry, where a solid plate is withdrawn from or plunged into a liquid pool, offers a prototypical example of wetting flows involving contact-line motion. Such flows are commonly studied using the lubrication approximation approach which is intrinsically limited to small interface slopes and thus small contact angles. Flows for arbitrary contact angles, however, can be studied using a generalized lubrication theory that builds upon viscous corner flow solutions. Here we derive this generalized lubrication theory for viscoelastic liquids that exhibit normal stress effects and are modelled using the second-order fluid model. We apply our theory to advancing and receding contact lines in the dip-coating geometry, highlighting the influence of viscoelastic normal stresses for contact line motion at arbitrary contact angle.

The breakup and coalescence of drops are elementary topological transitions in interfacial flows. The breakup of a drop changes dramatically when polymers are added to the fluid. With the strong elongation of the polymers during the process, long threads connecting the two droplets appear prior to their eventual pinch-off. Here, we demonstrate how elasticity affects drop coalescence, the complement of the much studied drop pinch-off. We reveal the emergence of an elastic singularity, characterized by a diverging interface curvature at the point of coalescence. Intriguingly, while the polymers dictate the spatial features of coalescence, they hardly affect the temporal evolution of the bridge. These results are explained using a novel viscoelastic similarity analysis and are relevant for drops created in biofluids, coating sprays, and inkjet printing.

Many microorganisms swim in fluids with complex rheological properties. Although much is now understood about motion of these swimmers in Newtonian fluids, the understanding is still developing in non-Newtonian fluids—this understanding is crucial for various biomimetic and biomedical applications. Here we study a common model for microswimmers, the squirmer model, in two common viscoelastic fluid models, the Giesekus fluid model and fluids of differential type (grade three), at zero Reynolds number. Through this article we address a recent commentary that discussed suitable values of parameters in these models and pointed at higher-order viscoelastic effects on squirming motion.

Microswimmers in nature often experience spatial gradients of viscosity. In this Letter we develop theoretical results for the dynamics of active particles, biological or otherwise, swimming through viscosity gradients. We model the active particles using the squirmer model, and show how viscosity gradients lead to viscotaxis for squirmers, and how the effects of viscosity gradients depend on the swimming gait of the microswimmers. We also show how such gradients in viscosity can be used to control active particles and suggest a mechanism to sort them based on their swimming style.

In this work, we study active particles with prescribed surface velocities in non-Newtonian fluids. We employ the reciprocal theorem to obtain the velocity of an active spherical particle with an arbitrary axisymmetric slip velocity in an otherwise quiescent second-order fluid. We then determine how the motion of a diffusiophoretic Janus particle is affected by complex fluid rheology, namely viscoelasticity and shear-thinning viscosity, compared to a Newtonian fluid, assuming a fixed slip velocity. We find that a Janus particle may go faster or slower in a viscoelastic fluid, but is always slower in a shear-thinning fluid as compared to a Newtonian fluid.

In this work, we numerically investigate the dynamics of a self-propelling autophoretic Janus particle in a weakly viscoelastic fluid. The self-propulsion is achieved by an asymmetry in the properties of the surface of the Janus particle that drives a surface slip velocity and bulk flow. Here we investigate the effect of viscoelasticity on this advection-diffusion problem over a range of Péclet and Damköhler numbers. Particles are found to swim faster, or slower, in viscoelastic fluids, and we show how reaction and diffusion rates affect the viscoelastic stresses that lead to changes in propulsion.

Particle motion in non-Newtonian fluids can be markedly different than in Newtonian fluids. Here we look at the change in dynamics for a few problems involving rigid spherical particles in shear-thinning fluids in the absence of inertia. We give analytical formulas for sedimenting spheres, obtained by means of the reciprocal theorem, and demonstrate quantitatively the differences in comparison to a Newtonian fluid. We also calculate the first correction to the suspension viscosity, the Einstein viscosity, for a dilute suspension of spheres in a weakly shear-thinning fluid.

Many biological fluids display shear-thinning rheology, where the viscosity decreases with an increasing shear rate. To better understand how this non-Newtonian rheology affects the motion of biological and artificial micro-swimmers, recent efforts have begun to seek answers to fundamental questions about active bodies in shear-thinning fluids. Previous analyses based on a squirmer model have revealed non-trivial variations of propulsion characteristics in a shear-thinning fluid via the reciprocal theorem. However, the reciprocal theorem approach does not provide knowledge about the flow surrounding the squirmer. In this work, we fill in this missing information by calculating the non-Newtonian correction to the flow analytically in the asymptotic limit of small Carreau number. In particular, we investigate the local effect due to viscosity reduction and the non-local effect due to induced changes in the flow; we then quantify their relative importance to locomotion in a shear-thinning fluid. Our results demonstrate cases where the non-local effect can be more significant than the local effect. These findings suggest that caution should be exercised when developing physical intuition from the local viscosity distribution alone around a swimmer in a shear-thinning fluid.

Domain growth in spinodal decomposition is usually described by a single time-evolving length scale. We show that the evolution of morphology of domains is nonmonotonic. The domains elongate rapidly at first and then, with the help of hydrodynamics, return to a more circular shape. The initial elongation phase does not alter with hydrodynamics. A small deviation from critical composition changes the morphology dramatically.

A basic feature of liquid drops is that they can merge upon contact to form a larger drop. In spite of its importance to various applications, drop coalescence on prewetted substrates has received little attention. Here, we experimentally and theoretically reveal the dynamics of drop coalescence on a thick layer of a low viscosity liquid. It is shown that these so-called "liquid lenses" merge by the self-similar vertical growth of a bridge connecting the two lenses. Using a slender analysis, we derive similarity solutions corresponding to the viscous and inertial limits. Excellent agreement is found with the experiments without any adjustable parameters, capturing both the spatial and temporal structures of the flow during coalescence. Finally, we consider the crossover between the two regimes and show that all data of different lens viscosities collapse on a single curve capturing the full range of the coalescence dynamics.

Many micro-organisms find themselves immersed in fluids displaying non-Newtonian rheological properties such as viscoelasticity and shear-thinning viscosity. The effects of viscoelasticity on swimming at low Reynolds numbers have already received considerable attention, but much less is known about swimming in shear-thinning fluids. A general understanding of the fundamental question of how shear-thinning rheology influences swimming still remains elusive. To probe this question further, we study a spherical squirmer in a shear-thinning fluid using a combination of asymptotic analysis and numerical simulations. Shear-thinning rheology is found to affect a squirming swimmer in non-trivial and surprising ways; we predict and show instances of both faster and slower swimming depending on the surface actuation of the squirmer. We also illustrate that while a drag and thrust decomposition can provide insights into swimming in Newtonian fluids, extending this intuition to problems in complex media can prove problematic.

We examine swimmers comprising of two rigid spheres which oscillate periodically along their axis of symmetry, considering when the spheres oscillate both in phase and in antiphase, and study the effects of fluid viscoelasticity on the swimmers' motion. These swimmers display reciprocal motion in Newtonian fluids and consequently, no net swimming is achieved over one cycle in such fluids. Conversely, in viscoelastic fluids, we find that the effect of viscoelasticity acts to propel the swimmers forward in the direction of the smaller sphere when the two spheres are of different sizes. Finally, we compare the motion of rigid spheres oscillating in viscoelastic fluids with elastic spheres in Newtonian fluids where we find similar results.