論文

Eggshell-based reversed-phase packing materials were applied to an analytical column for high-performance liquid chromatography. Commercially available eggshell powder was classified by a cyclone system to obtain three types of particles with different diameters (arithmetic mean ± standard deviation: 4.3 ± 3.8, 5.6 ± 3.3, and 9.5 ± 5.5 μm). Sedimentation separation removed tiny particles from each sample, resulting in particles with arithmetic means of 6.6 ± 5.5, 7.3 ± 4.5, and 10.2 ± 5.0 μm, respectively. The unclassified particles and three particle types treated with sedimentation separation were subsequently packed into analytical columns (150 mm × 4.6 mm I.D.), and their separation efficiencies were evaluated by comparing their height equivalent to a theoretical plate (HETP). The column without sedimentation separation exhibited the highest HETP, whereas the columns with sedimentation separation showed better separation efficiency and lower back pressure. The column with the best separation efficiency was applied for the separation of 10 alkylbenzenes and 5 steroids, and all peaks were observed with complete separation (peak resolution: RS > 1.5). Finally, the column was used for quantitative analysis of voriconazole, an azole antifungal agent, and imatinib, a first-generation molecularly targeted drug for cancer treatment, in spiked whole blood. Excellent accuracy (99.1-102.8%) and precision (0.6-1.9%) were observed for the spiked drugs and long-term stability (>3000 column volumes of mobile phase flow) indicated good applicability of the developed eggshell-based column as an analytical column for routine analyses of therapeutic drugs in blood.

Ecological surveys of living things based on DNAs from environmental samples are attractive. However, despite simplicity of water sampling from the target environment, it is still necessary to transport the samples to the laboratory for DNA analysis based on skillful next-generation sequencers. To perform DNA-oriented surveys based on a simple protocol without any special training, we demonstrated, in this study, the detection of genes from cell-containing environmental waters using gene sensor arrays that require no DNA labeling and no external indicators. Cell-suspended PBS or river water were used as models of environmental waters containing living things, and DNA samples were prepared by PCR amplification. Ferrocene-terminated probes were synthesized and immobilized on an electrode array to develop a sensor array. The sensor array showed a large response to a target DNA complementary to the probe and no response to a mismatched DNA, indicating sequence-specific detection. For DNA samples prepared from the cells in PBS, they showed good responses similar to those for the target DNA. They also significantly detected DNA samples from the cells in river water at a general environmental concentration (38 cells mL−1) with 28-fold larger responses than those for 0 cells mL−1.

In clinical diagnosis, the determination of target proteins at low concentration levels is generally performed by immunoassays, such as the enzyme-linked immunosorbent assay (ELISA), which is a time-consuming process. To date, paper-based ELISA platforms enabling faster and less expensive analysis have been developed, but their important issue for clinical applications is the limited sensitivity compared to conventional ELISA. To address this challenge, this paper introduces a simple, rapid, and highly sensitive detection method for non-nucleic acid targets achieved by integrating the CRISPR/Cas12a system into paper-based ELISA. An origami-type paper-based device enabling simple assay operation has been designed, and the detection of targets on the paper substrates is based on observing the fluorescence signal induced by the CRISPR/Cas12a enzyme cleaving a probe single-stranded DNA (ssDNA) labeled with fluorophore and quencher (FQ reporter). To enhance sensitivity, antibodies labeled with a network of multiple DNA activating the CRISPR/Cas12a enzyme have been utilized as detection antibodies. As a result, the developed device successfully boosted the detection sensitivity for both human IgG and the hepatitis B virus surface antigen (HBsAg). In particular, the limit of detection (LOD) for HBsAg was estimated to be 12 pg/mL, representing over 10-fold higher sensitivity compared with commercially available HBsAg ELISA kits (LOD: 200 pg/mL). In addition, the fluorescence response toward porcine whole blood samples containing different HBsAg concentrations was also confirmed by capturing images with a smartphone, followed by quantitative data analysis. These results demonstrate the potential applicability of the proposed platform for clinical tests at the point of care.

The availability of various calcium ion (Ca2+) fluorescent probes has contributed to revealing physiological events related to intracellular Ca2+. However, conventional probes face challenges for quantitatively and selectively visualizing high Ca2+ concentrations in cells induced by any stimuli, including biomolecules or electrical signal that disrupt Ca2+ homeostasis. In this report, we designed and synthesized a low-affinity ratiometric Ca2+ probe, KLCA-Fura, utilizing o-aminophenol-N,N-diacetate-O-methylene-methylphosphinate (APDAP) as a ligand, for which we recently demonstrated the suitability as a new low-affinity ligand for Ca2+. KLCA-Fura showed a blue shift in excitation wavelength with increasing Ca2+ concentration based on the intramolecular charge transfer (ICT). Its affinity for Ca2+ is lower than commercially available conventional Ca2+ probes. Furthermore, the selectivity for Ca2+ and the fluorescence intensity were considered sufficient to accurately detect Ca2+. The corresponding acetoxymethyl ester, KLCA-FuraAM, was synthesized for intracellular imaging and applied to Ca2+ quantification in neurons. KLCA-FuraAM enabled quantitative ratiometric monitoring of the two-step Ca2+ concentration increase induced by glutamate stimulation. While this two-step response was not clearly observed with a commercially available low-affinity ratiometric Ca2+ probe, Fura-FF, KLCA-FuraAM has demonstrated the potential to quantitatively visualize the behavior of high Ca2+ concentrations. The ratiometric low-affinity Ca2+ probe, KLCA-Fura, is expected to be a powerful tool for discovering new functions of Ca2+ in neurons.

Although the field of antibody drugs has grown larger, the antibody production still faces several challenges. Effective antibody purification is required, but the conventional purification method for antibodies is cost intensive and often causes aggregation problems, indicating the need for new alternative antibody purification methods. In the present study, a constant temperature antibody purification system for use with a thermo-responsive polymer column was developed based on switching of anion species in eluents. By adjusting the temperature for each antibody, the developed column enabled separation of the therapeutic monoclonal antibodies, rituximab and trastuzumab, from contaminants without changing salt concentration or pH of the eluents. The thermo-responsive hydrogel-modified column packing material was synthesized by introducing n-butyl methacrylate, acrylic acid, N,N′-methylenebisacrylamide and N-isopropylacrylamide to the surface of silica beads with an initiator by a graft-from approach. Elution behavior of antibodies with three types of anions, such as citrate, phosphate, and chloride were tested under three different temperature conditions. It was demonstrated that the thermo-responsive hydrogel grafted column showed a switchable antibody retention behavior at constant temperature and salt concentration, with antibody adsorption by NaCl eluent and desorption by citric acid buffer eluent.

Replacing an N,N-dimethylamino group in a classical fluorophore with a four membered azetidine ring provides an improved luminescence quantum yield. Herein, we extended this strategy to bioluminescent firefly luciferin analogues and evaluated its general validity. For this purpose, four types of luciferin cores were employed, and a total of eight analogues were evaluated. Among these analogues, unexpectedly, only the benzothiazole core analogue benefited from an azetidine substitution and showed enhanced bioluminescence. In addition, fluorescence measurements revealed that an azetidine substitution improved the fluorescence quantum yield by 2.3-times compared to a N,N-dimethylamino group. These findings clarify the differential effects of azetidine substituents in luciferins and present one possible strategy for enhancing photon output in benzothiazole type luciferins through a synthetic approach.

Due to their low cost, simplicity, and pump-free liquid transport properties, colorimetric assays on paper spots and microfluidic paper-based analytical devices (µPADs) are regarded as useful tools for point-of-care testing (POCT). However, for certain types of colorimetric assays, the “non-transparent” and “white” characters of paper can be a disadvantage. In this work, the possibilities of using cellophane as an alternative platform for colorimetric assays have been investigated. Cellophane is a low cost and easy-to-handle transparent film made of regenerated cellulose. Owing to its hydrophilic character, cellophane-based microfluidic channels fabricated through a print–cut–laminate approach enabled pump-free liquid transport into multiple detection areas, similar to µPADs. In addition, the water absorption characteristics of cellophane allowed the stable immobilization of water-soluble colorimetric indicators without any surface modification or additional reagents. The transparency of cellophane provides possibilities for simple background coloring of the substrates, increasing the dynamic signal range for hue-based colorimetric assays, as demonstrated for two model assays targeting H2O2 (46-fold increase) and creatinine (3.6-fold increase). Finally, a turbidity detection-based protein assay was realized on black background cellophane spots. The lowest limits of detection achieved with the cellophane-based devices were calculated as 7 µM for H2O2, 2.7 mg dL−1 for creatinine, and 3.5 mg dL−1 for protein (human serum albumin). Graphical Abstract: [Figure not available: see fulltext.]

Thermo-responsive polymers having a lower critical solution temperature (LCST) have attracted attention for biological applications such as drug delivery, diagnosis, and coating materials. In recent years, research on predicting LCST by utilizing machine learning has been conducted. However, since these methods targeted only copolymers combining specific monomer structures, they are not versatile, and multiple trials are still required to obtain new thermo-responsive polymers with the desired LCST. In this study, a prediction model for cloud point temperature (TCP) was built by a combination of materials informatics and chemical insight, named sparse modeling for small data (SpM-S) using a small dataset of polymers collected from the literature as training data. This approach created a model that is interpretable, easy to calculate, and versatile. The prediction accuracy was validated using data from different literature sources and experimental test data. The model was able to predict the TCP of polymers containing monomers not included in the dataset as well as polymers containing monomers included in the dataset. The predictive model has the potential to guide the design of new thermo-responsive polymers, and to contribute to efficient development of thermo-responsive polymers.

The separation capacity of a column typically remains constant. By applying stimuli-responsive materials to the stationary phase, the separation capacity in a single column can be tuned; however, the separation mode is not completely switched. In this study, we aimed to develop a cation/anion-exchange mode switching chromatography approach, in which the monomer ratio is adjusted, enabling the surface charge to become either negative or positive in response to mobile phase pH. Three types of beads were prepared, each modified with a pH-responsive mixed-charge polymer combining a cationic monomer, a pH-responsive carboxylic acid monomer, a neutral monomer, and a cross-linking monomer. The composition ratio of the cationic monomer to the pH-responsive carboxylic acid monomer was set at 1 : 2 so that the cation-exchange mode occurs at a pH above the pKa and the anion-exchange mode occurs below the pKa. At a pH below the pKa, the retention factor of the negatively charged compound increased. In contrast, at a pH above the pKa, the retention factor of the positively charged compound increased, confirming the charge switching on the bead surface. Switching to the cation- and anion-exchange mode enabled the separation of five basic antidepressants and acidic non-steroidal anti-inflammatory drugs, respectively. Utilizing a pH-responsive mixed-charge polymer, we attributed a cation/anion-exchange mode to a single column.

Divalent metal cations such as calcium ion (Ca2+) and magnesium ion (Mg2+) are indispensable to the regulation of various cellular activities. In this research, we developed the KLCA series utilizing o-aminophenol-N,N-diacetate-O-methylene-methylphosphinate (APDAP) as a target binding site, which was reported recently as a highly free Mg2+-selective ligand. KLCA-301 with orange fluorescence based on a rhodamine fluorophore and KLCA-501 with near-infrared (NIR) fluorescence based on a Si-rhodamine fluorophore were synthesized, intended for application to multicolor imaging. The evaluation of the fluorescence response to Ca2+ and Mg2+ of the KLCA series indicated the applicability as low-affinity Ca2+ probes. While KLCA-301 mainly localized in the cytosol in cultured rat hippocampal neurons, KLCA-501 localized to the cytosol and granular organelles in neurons. Comparison of the fluorescence response of KLCA-301 and the high-affinity Ca2+ probe Fluo-4 upon stimulation by glutamate in stained neurons revealed that KLCA-301 could reflect the secondary large rise of intracellular Ca2+, which Fluo-4 could not detect. In addition, KLCA-501 showed a fluorescence response similar to the low-affinity Ca2+ probe Fluo-5N upon stimulation by glutamate in stained neurons, concluding that KLCA-301 and KLCA-501 could be used as low-affinity Ca2+ probes. The KLCA series offers new options for low-affinity Ca2+ probes. Moreover, KLCA-501 achieved simultaneous visualization of the change in Ca2+ and ATP concentrations and also in mitochondrial inner membrane potential in neurons. KLCA-501 is expected to be a strong tool that enables simultaneous multicolor imaging of multiple targets and elucidation of their relationship in cells.

Nucleic acid testing (NAT) is widely considered the gold standard in analytical fields, with applications spanning environmental monitoring, forensic science and clinical diagnostics, among others. However, its widespread use is often constrained by complicated assay procedures, the need for specialized equipment, and the complexity of reagent handling. In this study, we demonstrate a fully integrated 3D-printed biosensensing device employing a CRISPR/Cas12a-based dual-enzymatic mechanism for highly sensitive and user-friendly nucleic acid detection. A plastic probe stick was designed to host small-sized gold nanoparticles, enhancing enzyme labeling density. Alkaline phosphatase (ALP) was then conjugated via single-stranded DNA, requiring only a single enzyme substrate addition to generate a simple visual signal change. This approach eliminates the need for amplification or centrifugation steps, achieving a limit of detection (LOD) as low as 10 pM – among the highest sensitivities reported for amplification-free colorimetric nucleic acid detection. Furthermore, we developed a device that incorporates this probe stick, integrates all necessary reagents, and features a smartphone-compatible accessory for quantitative analysis. This allows end-users to perform visual or quantitative DNA analysis with simple operations, achieving a visual detection limit of approximately 100 pM, comparable to other CRISPR-based non-amplified nucleic acid detection methods. Additionally, the system successfully distinguished perfectly matched from mismatched nucleic acid sequences, demonstrating its specificity and versatility. Although certain design limitations affected the sensitivity of the integrated device compared to the probe stick alone, the simplicity and portability of this device make it a promising tool for rapid nucleic acid screening in clinical diagnostics, environmental monitoring, and food safety control. This study paves the way for the development of practical biosensors for point-of-care testing (POCT) applications.

The integration of barcode technology with smartphones on paper-based analytical devices (PADs) presents a promising approach to bridging manual detection with digital interpretation and data storage. However, previous studies of 1D barcode approaches have been limited to providing only a “yes/no” response for analyte detection. Herein, a method of using barcode readout for semiquantitative signal detection on PADs has been achieved through the integration of barcode technology with a distance-based measurement concept on PADs. To demonstrate the feasibility of this concept, a PAD fabrication strategy incorporating barcodes was explored, using the enzymatic reaction between horseradish peroxidase (HRP), 3,3′-diaminobenzidine (DAB), and H2O2 as a model system. The enzyme-catalyzed polymerization of DAB to polyDAB in the presence of hydrogen peroxide results in the appearance of color observable by the naked eye inside a paperfluidic channel, with the color-changed length depending on the H2O2 concentration. At the same time, the barcode pattern displayed as a result of this distance-based color evolution overlaid with a paper-based barcode layer can be read using a smartphone application. Parameters affecting the signal readout performance were studied. The developed device can be used to detect H2O2 concentrations in the range of 0.25 to 10 mM within 90 min with 79.6% of barcode signals correctly readable. Additionally, results from different smartphone models showed a consistent reading performance (78.4-79.6%). Finally, the quantification of glucose levels in artificial urine samples was demonstrated. This developed PAD signaling strategy offers end-users more simplicity and can be used as a standalone device or in conjunction with other digital devices.

Multiple signal detection methods are known for lateral flow immunoassays (LFIAs), with colorimetric approaches dominating the field. However, their limited sensitivity is a remaining challenge. Fluorescence-based signaling is regarded as a more sensitive method, but it comes at the cost of partial sacrifice of the user-friendliness of LFIAs due to the requirement of an excitation light source. In this context, bioluminescence providing an inherently high signal to noise ratio without the need of excitation light could be an attractive alternative. But only a few studies have demonstrated the application of bioluminescence signaling in LFIAs. This work aimed at the development of a simple bioluminescence-based LFIA for the detection of aflatoxin B1 (AFB1), used as a model target in a competitive LFIA format. Signal transduction was achieved by nanobody-nanoluciferase (Nluc) fusion proteins. These small-sized recombinant heavy-chain-only antibodies derived from the camelidae family directly linked with the Nluc enzyme produce high intensity glow-type bioluminescence in combination with the furimazine substrate. LFIA devices consisting of a sample pad, nitrocellulose membrane and absorbent pad with AFB1-BSA conjugate deposited at the test line on the nitrocellulose membrane, achieved an LOD of 0.26 ng mL−1 for aqueous AFB1 solutions pre-mixed with Nanobody-Nluc and bioluminescence emission observed on an imaging system. More user-friendly LFIA devices with integrated conjugate pad and pre-deposited Nanobody-Nluc provided clear AFB1 concentration-dependent bioluminescence signals with low background and enabled readout with a standard digital camera, resulting in an LOD of 1.12 ng mL−1. Finally, the LFIA strips have been applied in AFB1-spiked oat milk samples. The LOD of 4.09 ng mL−1 achieved in the real sample matrix is well below the maximum allowable residual concentration of AFB1 in the U.S. (20 ng mL−1).

Although CRISPR-based nucleic acid detection has great potential in point-of-care testing due to its simplicity, it has been rarely integrated into paper-based analytical devices (PADs), which are attractive platforms to simplify assays. This work introduces a CRISPR-assisted nucleic acid quantification approach integrated into a PAD with signal readout by a personal glucose meter (PGM). Retention of magnetic beads by filter paper and pre-deposition of all required reagents by freeze-drying stabilized with trehalose enabled the indirect quantification of human papilloma virus (HPV) DNA through a PGM readout without complicated user intervention and complex reagent handling. The calculated limit of detection was 57 pM, which is comparable with other amplification-free CRISPR-based assays detecting nucleic acids. The fully integrated device exhibited good storage stability for up to 4 weeks, suggesting its applicability toward practical point-of-care nucleic acid quantification.

Staphylococcal enterotoxin B (SEB), a potent enterotoxin produced by Staphylococcus aureus, has been implicated in incidences of Staphylococcal food poisoning in the Philippines. The use of lateral flow immunoassay devices to detect this toxin in solid food samples, like durian candy, at the point of sampling is constrained by the requirement for sample purification (e.g. centrifugation). This problem is also true with the other applications of LFIA devices on food samples. To overcome this challenge, a lateral flow immunoassay (LFIA) device capable of detecting SEB in unpurified durian candy sample was developed in this study. A modified LFIA device was assembled with three layers of glass fiber pads functioning as sample pads instead of a conventional cellulose fiber pad. Unlike with the cellulose fiber pad, the glass fiber sample pads acted as filter and allowed the flow of a 1:5 dilution of durian candy. The LFIA device applied to spiked 1:5 diluted durian candy samples achieved a visual limit of detection of 5 ng/mL for SEB, which is twofold lower than reported for previous LFIA devices designed to detect SEB in food samples.

The process of antibody purification using Fc affinity ligands such as protein A, G, and L faces several challenges including high cost, low stability, and loss of antibody activity due to harsh elution conditions. Here, we describe a chromatographic purification of antibodies utilizing a pH-responsive mixed-charge polymer that mimics the IgG-binding peptide (Z34C) derived from the B domain of protein A. The protein A mimetic resins were prepared by modifying the surface of a TOYOPEARL, methacrylate resin with a polymer that mimics the amino acid sequence of Z34C and the functions of histidine and acidic and neutral amino acids using histamine methacrylamide (HisMA), methacrylic acid, and neutral monomers. The therapeutic monoclonal antibody (mAb), rituximab, was retained on the column at pH 7 and eluted under mildly acidic conditions at pH 5 using a protein A mimetic resin (HisMA20-EEMA) optimized for antibody interaction. The injected antibodies were selectively captured on the column by hydrophobic and electrostatic interactions with the protein A mimetic polymer under neutral conditions and eluted by electrostatic repulsion under acidic conditions. The HisMA20-EEMA column successfully purified mAbs from mixtures with BSA, mouse ascites fluid, and hybridoma cell culture supernatant. In addition, the HisMA20-EEMA column consistently achieved 90% antibody recovery in 100 consecutive purifications from cell culture supernatant. The antibody purification method presented in this study is low cost, highly durable, easy to synthesize, and allows for mild elution conditions. The results demonstrate that the approach of mimicking IgG-binding peptides with mixed-charge polymers is useful for the development of column packing materials for antibody purification.

Lateral flow immunoassays (LFIAs) are widely used for the simple and rapid detection of various targets at the point of need. However, LFIAs enabling the simultaneous detection of multiple analytes and the possibility for naked-eye semi-quantitative analysis are facing various challenges, including the requirement of large sample volumes, low efficiency, and accuracy. This is particularly the case for the competitive immunoassay format targeting the detection of low molecular weight compounds, such as, for example, drugs. Due to limited space for multiple reaction zones on a single planar nitrocellulose membrane, conducting multiplexed tests requires the addition of more test strips, which consequently increases the size of the whole device. To overcome these spatial constraints, two 3D-printed devices fitting eight assay lanes of both backed and unbacked nitrocellulose membranes have been designed. For proof of concept, 8-OHdG, caffeine, and acetaminophen were used as model analytes. Inkjet printing was applied to deposit capture reagents in the form of text symbols while controlling the concentration thresholds for text readability to achieve an intuitive result expression. A comparably small sample volume of 350 mL was sufficient to simultaneously visually distinguish 4 concentration levels of caffeine (0, 4, 10, 175 ng mL-1) and acetaminophen (0, 4, 8, 12 ng mL-1) in mixed solutions without crosstalk. This study demonstrates the potential of 3D-printed LFIA devices for multiplex and semiquantitative analyte detection.

Staphylococcal enterotoxins (SEs) are among the leading causes of foodborne illnesses in the Philippines. Rapid and sensitive detection of these toxins in food, particularly staphylococcal enterotoxin B (SEB) - the most potent type of SE - is imperative. Rapid toxin detection can be achieved using a lateral flow immunoassay (LFIA) device. However, low sensitivity has been a persistent issue with LFIA devices. To develop an LFIA device with improved sensitivity, this study investigated the exclusive use of antibodies as biorecognition molecules in a dual-detection probe LFIA device format and the configuration of the LFIA device to release the probes nonsequentially and sequentially. The LFIA device was fitted with two layers of glass fiber sample pads, loaded separately with the two detection probes, and partially separated by a Scotch tape film. For the nonsequential LFIA device, the two sample pads were pretreated with blocking buffers containing the same sugar concentration, whereas for the sequential LFIA device, the two sample pads were pretreated with blocking buffers containing different sugar concentrations. When tested against a filtered, homogenized durian candy sample, the nonsequential LFIA device generated higher signal intensity than the sequential LFIA device. This result suggests that aggregation of the detection probes was superior to sequential binding in enhancing the signal of the LFIA device for SEB detection. The sensitivity of the nonsequential LFIA device at 5 ng/mL was two-fold higher compared to previous POCT LFIA devices for SEB detection in food samples.

Bioluminescence (BL) imaging, which utilizes light emitted through the enzymatic reaction of luciferase oxidizing its substrate luciferin, enables sensitive and noninvasive monitoring of life phenomena. Herein, we developed a series of caged furimazine (FMZ) derivatives by introducing a protective group at the C-3 position and a hydroxy group at the C-6 phenyl ring to realize long-term live-cell BL imaging based on the NanoLuc (NLuc)/NanoKAZ (NKAZ)-FMZ system. The membrane permeability and cytotoxicity of the substrates were evaluated and related to their hydrophobicity. Among the series, the derivative with the bulkiest protective group (adamantanecarbonyl group) and a hydroxy substituent (named Ad-FMZ-OH) showed significantly prolonged and constant BL signal in cells expressing NLuc compared to the native FMZ substrate. This derivative enabled continuous BL imaging at the single-cell level for 24 h. Furthermore, we applied Ad-FMZ-OH to BL imaging of myocyte fusion and succeeded in the consecutive and sensitive monitoring at a single-cell level over a day. In summary, NLuc/NKAZ-caged FMZ derivatives have the potential to be applied to live-cell BL imaging of various life phenomena that require long-term observation.