論文

Silica frustules of most planktonic diatoms have many shallow holes in which the length (L) is smaller than the width (W). The present study focuses on a silica ultrastructure of setae of a planktonic diatom having deep (L/W > 1) holes. Here, we characterized microscopically patterned nanoholes on the silica walls of thick, robust, and hollow setae of a colony of Chaetoceros coarctatus. Basically, tetragonal poroid arrangements with and without a costa pattern are observed on the inner and outer surfaces, respectively, for three kinds of curving hollow setae attached to the anterior, intercalary, and posterior parts of the colony. The seta structures including specific poroid arrangements and continuity of deep nanoholes depend on the location. The deep nanoholes ∼90 nm wide are elongated from 150 to 1500 nm (L/W ∼17) with an increase in the wall thickness of the polygonal tubes of the setae. The inside poroid array, with a period of 190 nm in the extension direction of setae, is lined by parallel plates of the costae. However, the poroid arrangement on the outer surface is disordered, with several holes obstructed with increasing wall thickness of the posterior terminal setae. According to the movement of a colony in a fluid microchannel, the thick curving terminal setae is suggested to involve attitude control and mechanical protection. Using an optical simulation, the patterned deep through-holes on the intercalary setae were suggested to contribute anti-reflection of blue light in the wavelength range of 400 to 500 nm for the promotion of photosynthesis in seawater.

Visualization and quantification of invisible lights, such as microwaves, are significant for their safe use. In general, a sensitizer material combined with a transistor is used as electronic devices for the measurement. Here, we developed a thermoresponsive color-change hydrogel of poly(N-isopropylacrylamide) (PNIPAAm) cross-linked by a layered organic composite based on polydiacetylene (PDA) for visualization and colorimetric quantification of microwaves. The layered PDA in the PNIPAAm hydrogel showed the temperature-dependent gradual color change with heating. Irradiation of microwaves induced the color change of PDA through heating of water in the hydrogel and subsequent volume shrinkage. The color of the gel was applied to visualize the temperature distribution with increasing irradiation time of microwaves. Moreover, the power of the irradiated microwave was quantified by time to the complete color change of the gel. The results indicate that the stimulus conversion process has potentials for development of a variety of imaging and quantification devices based on the layered PDA.

Oriented attachment of homogeneously shaped nanoblocks, such as nanocubes and nanorods, is attracting attention as a fundamental process of non-classical crystal growth to produce specific ordered architectures of functional materials. Although lateral alignments of horizontally oriented nanorod are commonly observed at the air-liquid and liquid-solid interfaces in dispersion systems, the accumulation of vertically oriented nanorods on a substrate has rarely been produced in a wide area over a millimeter-sized flat surface. Here, we achieved homogeneous stacking of vertical fluorapatite nanorods with a large aspect ratio (~6) in a toluene-hexane mixture system through a gradual decrease in the dispersibility. Micrometer-thick flat films in which the c direction of fluorapatite nanorods was arranged perpendicularly to the surface were deposited on a substrate with a diameter of over 20 mm. The wide-area accumulation of vertical nanorods occurs through the self-assembly of laterally arranged clusters of nanorods covered with a stabilizing agent and subsequent gentle sedimentation on the substrate surface. This journal is

Yield-prediction models were studied for efficient exfoliation of soft layered materials stackedviavan der Waals interactions with the assistance of machine learning on small experimental data. High-yield exfoliation of graphite and layered organic polymer was achieved under the conditions guided by the models in a limited number of experiments.

Herein, few-layered titanate nanosheets with a large lateral size and surface functionalization were synthesized via the exfoliation of precursor layered composites in an organic medium. The combination of layered compounds, intercalated guests, and dispersion media has the potential for the synthesis of nanosheets with controlled lateral sizes, thicknesses, and surface chemistry through exfoliation.

© 2018, The Society of Polymer Science, Japan. Highly porous organic structures are synthesized by the oxidative polymerization of pyrrole derivatives in a concentrated monomer and oxidant solution. The rapid polymerization of pyrrole by oxidation with FeCl 3 in CHCl 3 as a cosolvent for the monomer and the oxidant leads to nanometer-scale branching morphologies that have a specific surface area of ~200 m 2 g −1 . The polymerization of pyrrole derivatives, such as 1-methylpyrrole and 1-ethylpyrrole, produced intragranular micropores of ~1 nm in diameter in the polymer grains of nanoscale dendrites. We obtained highly porous polymers of polypyrrole derivatives that have high specific surface areas (~900 m 2 g −1 ) with bimodal pore-size distribution. The enhanced adsorbability of porous polymer dendrites for aromatic molecules was confirmed, in comparison with that of conventional polystyrene adsorbents.

© 2018 The Royal Society of Chemistry. Nanometer-scale switching of the crystallographic orientation enables production of novel superlattices for exploration of new functions. Elaborate multilayered architectures of Mn3O4 nanocuboids were constructed by a convective self-assembly process. The nanometric cuboids were accumulated into orientation-switched superlattices on micrometric scales by controlling the a and c directions of the tetragonal crystal periodically. The orthogonal stacking of the tetragonal nanoblocks was achieved through the layer-by-layer manipulation process of two types of 2D arrays with different orientations.

© 2018 American Chemical Society. The combination of heterogeneous inorganic nanocrystals provides novel nanometer-scale architectures for exploration of novel functions. In the present study, heterogeneous bilayers, such as BaTiO3-Fe3O4 and Mn3O4-CeO2, are fabricated via layer-by-layer stacking of several rectangular nanoblocks 5-23 nm in size by evaporation-driven self-assembly. Specific heterojunctions between inorganic crystals are constructed by nanoscale simple brick work through spontaneous adjustment of the crystallographic orientations of the nanoblocks in the lower and upper layers.

© 2018, The Author(s). Conducive polymers have a wide range of applications originating from their π-conjugated systems. The redox reactions of conductive polymers with doping and dedoping of anions have been applied to cathodes for charge storage. In contrast, the redox reactions with cations have not been fully studied in anodes for charge storage. Here, we found that the nanostructures of conductive polymers, such as polypyrrole (PPy) and polythiophene (PTp) derivatives, have reversible redox reactions with cations. The PPy and PTp nanostructures acted as anodes with specific capacities of 157 and 44.4 mA h g–1, respectively, at a current density of 20 mA g–1. The introduction of a carboxy group to the pyrrole and thiophene rings enhanced the specific capacities up to 730 and 963 mAh g–1, respectively. The enhanced electrochemical properties were not observed in the bulk-size conductive polymers. The results suggest that conductive-polymer nanostructures have potential for developing metal-free, high-performance charge storage devices.

© 2018 American Chemical Society. Tetragonal 2D lattices are spontaneously formed by the self-assembly of homogeneous nanocubes. However, ordered arrays consisting of differently sized rectangular nanoblocks have not been achieved because the regulation of the assembly is weakened by the combination of binary units. In the present work, ordered arrays comprising binary nanocubes were investigated using the combination of 10 nm Pt nanocubes and 20 nm BaTiO3 nanocubes. Heterogeneous but ordered 2D tetragonal lattices were successfully produced using differently sized rectangular nanoblocks. The highly ordered self-assembly in the heterogeneous system requires the matching of the size ratio of binary nanocubes with the buffer effect of oleic acid covering the building units.

Exfoliation is a general route to obtain two-dimensional (2D) nanomaterials. A variety of methods have been developed for controlled exfoliation of layered materials based on stacking via van der Waals interaction, such as graphite and transition-metal dichalcogenides. On the other hand, rigid layered materials consisting of inorganic layers and interlayer metal ions stacked via electrostatic interaction, such as transition-metal oxides and clays, have a limited number of exfoliation methods. Here we studied a new exfoliation route through formation of soft layered composites. Intercalation of guest organic molecules changed rigid inorganic layered compounds into soft layered composites with stacking via van der Waals interaction. The soft layered inorganic-organic composites were exfoliated into surface-modified nanosheets in organic media. The layered composites showed swelling with dispersion in organic media. The time-course analyses suggest that the layered composites were simultaneously exfoliated in the vertical direction and fractured in the lateral direction. Thinner and smaller nanosheets were obtained with an increase in the exfoliation time. Although the resultant nanosheets gradually aggregated in the colloidal liquid, the original dispersion state was recovered with sonication for 5 min at room temperature. This exfoliation route using soft layered composites can be used in the synthesis and application of a variety of 2D nanomaterials.

A phase-segregated composite of polystyrene (PSt) and layered polydiacetylene (PDA) was formed through simultaneous polymerization and crystallization. As the motion of PSt chains with glass transition is transferred to that of PDA, the color change was achieved by the shortening of the conjugation length with deformation of the layered structure.

Sapphirinid copepods, which are marine zooplankton, exhibit tunable structural colors originating from a layered structure of guanine crystal plates. In the present study, the coloring portion of adult male of a sapphirinid copepod, Sapphirina nigromaculata, under the dorsal body surface was characterized to clarify the regulation and actuation mechanism of the layered guanine crystals for spectral control. The coloring portions are separated into small domains 70–100 µm wide consisting of an ordered array of stacked hexagonal plates ~1.5 µm wide and ~80 nm thick. We found the presence of chitin-based honeycomb frameworks that are composed of flat compartments regulating the guanine crystal plates. The structural color is deduced to be tuned from blue to achromatic via yellow and purple by changing the interplate distance according to vital observation and optical simulation using a photonic array model. The framework structures are essential for the organization and actuation of the particular photonic arrays for the exhibition of the tunable structural color.

Uniformly sized nanoparticles 35nm in diameter of Y 2 O 3 - stabilized ZrO 2 (YSZ) were fabricated by a water-toluene twophase solvothermal method. The nanoparticles that were covered with oleic acid were highly dispersed in organic media. The size and doping concentration were tuned by adjusting the preparation conditions. The fabrication of YSZ thin films was achieved through hexagonal arrangement by evaporation-induced selfassembly of highly dispersive mono-sized nanoparticles.

A wide variety of nanosheets including monolayers and few-layers have attracted much interest as two-dimensional (2D) materials for the unique anisotropic structures and properties. On the other hand, one of the significant remaining and challenging issues is the lateral-size control. Since 2D materials are generally synthesized by the exfoliation of layered materials, the lateral size is not easily controlled in the breaking-down processes. The experimental factors have not been found for the control and prediction. In the present work, lateral sizes of the exfoliated transition-metal-oxide nanosheets were predicted and controlled by the assistance of machine learning. Layered composites of host inorganic layers and guest organic molecules were exfoliated into nanosheets in organic dispersion media. The lateral size of the nanosheets was estimated by dynamic light scattering (DLS), instead of microscopy methods, to achieve high-throughput analyses. Factors governing the lateral size are explored on the small experimental data by the assistance of sparse modeling, a method of machine learning. The eight physicochemical parameters of the organic guests and dispersion media were extracted by sparse modeling for the construction of the size-prediction model. The size-prediction model accelerated the selective syntheses of the nanosheets with large and small lateral sizes in a limited number of experiments. The results indicate that the prediction model is a guideline to find suitable exfoliation conditions for size control. Size-selective syntheses of a variety of 2D materials can be achieved by similar methods using sparse modeling on small experimental data. Moreover, sparse modeling is applicable to control the design and exploration of other materials and their processing based on small data. This journal is

A variety of inorganic and organic nanosheets with characteristic structures and properties can be synthesized through exfoliation of layered materials. However, in general, immense time and efforts are required for exploration of exfoliation conditions and characterization of nanosheets. In addition, it is challenging to improve the yield of nanosheets obtained through exfoliation. Here a materials-informatics-assisted high-yield synthesis of nanosheets is proposed, which does not require experience and intuition. Layered composites containing inorganic layers and interlayer organic guests are delaminated into nanosheets in a variety of dispersion media. First, an experimental screening is performed to find efficient exfoliation conditions and obtain a training dataset for the informatics approach. Sparse modeling is then used facilitating the extraction of important factors predicting the yield of nanosheets. High-yield (up to ≈50%) synthesis of nanosheets is demonstrated in unknown systems in a minimum number of experiments. The yield is higher than those typically reported for layered materials. It is expected that the effective combination has potentials for not only discovery of compounds but also structure control of materials.

We clarified the specific micrometric arrangement and nanometric structure of the radiolarian crystalline spines that are not a simple single crystal. A body of the celestite (SrSO4) skeleton of acantharian Acanthometra cf. multispina (Acanthometridae) composed of 20 radial spines having four blades was characterized using microfocus X-ray computed tomography. The regular arrangement of three types of spines was clarified with the connection of the blades around the root of each spine. The surface of the spines was covered with a chitin-based organic membrane to prevent from dissolution in seawater. In the nanometric scale, the mesocrystalline structure that consists of nanoscale grains having distorted single-crystal nature was revealed using scanning- and transmission electron microscopies, electron diffraction, and Raman spectroscopy. The acantharian skeletons have a crystallographically controlled architecture that is covered with a protective organic membrane. These facts are important for penetrating the nature of biogenic minerals.

To achieve a sustainable-energy society in the future, next-generation highly efficient energy storage technologies, particularly those based on multivalent metal negative electrodes, are urgently required to be developed. Magnesium rechargeable batteries (MRBs) are promising options owing to the many advantageous chemical and electrochemical properties of magnesium. However, the substantially low working voltage of sulfur-based positive electrodes may hinder MRBs in becoming alternatives to current Li-ion batteries. We proposed halide-free noncorrosive ionic liquid-based electrolytes incorporating Mg[TFSA]2 for high-voltage MRB applications. Upon the complexation of Mg[TFSA]2 with tetraglyme (G4) and strict control of the liquid states, the electrolytes achieved excellent anodic stability up to 4.1 V vs. Mg2+/Mg even at 100 °C. The modest electrochemical activities for magnesium deposition/dissolution in the [Mg(G4)][TFSA]2/ionic liquid electrolyte can be improved by certain modifications to the coordination state of [TFSA]-. Dialkyl sulfone was found to be effective in changing the coordination state of [TFSA]- from associated to isolated (free). This coordination change successfully promoted magnesium deposition/dissolution reactions, particularly in the coexistence of ether ligand. By contrast, the coordination of Mg2+ by strongly donating agents such as dimethyl sulfoxide and alkylimidazole led to the complexes inactive electrochemically, suggesting that interaction between Mg2+ and coordination agents predominates the fundamental electrochemical activity. We also demonstrated that an enhancement in the electrochemical activity of electrolytes contributed to improvements in the cycling ability of magnesium batteries with 2.5 V-class MgMn2O4 positive electrodes.

Pure and carbonated hydroxyapatite (HA) nanocrystals are regarded as capital biocompatible materials. However, the formation process for faceted nanorods of HA has not been sufficiently clarified in supersaturated aqueous solution systems. Here, we monitored morphological evolution of carbonated HA to faceted crystals on the conversion of a parent calcite nanocrystal under hydrothermal conditions. In the initial stage, low-crystalline carbonated HA nanosheets ∼5 nm thick are formed as metastable intermediates. In the progressive stage, faceted nanorods ∼50 nm wide and ∼200 nm long grow as a relatively stable form of HA through the intermediates. The morphological evolution is ascribed to a stabilizing process of HA for improvement of the crystallinity and a decrease in the specific surface area and carbonate content.

Calcareous skeletons of stony corals are composed of a low-crystalline core (center of calcification: COC) and surrounding fibrous crystals. We characterized the overall framework of juvenile Acropora digitifera corals to clarify the entire calcic architecture and the contribution of abiotic processes. Skeletal and tubular frameworks contain string and sheet COCs, respectively, consisting of strained aragonite nanograins. Parallel and curved structures of fibrous aragonite develop around the COC cores through geometric selection and a gradual change in the growth direction of the c-direction-elongated nanorods. Based on a study of the nanoscale morphology of the coral frameworks by comparing them to fibrous crystals grown in artificial systems, it appears that subsequent precipitation of the fibrous aragonite on the COC is primarily regulated by environmental abiotic parameters. The architecture of the COC network is deduced to be designed biologically and then thickened by the fibrous crystals that are produced with morphology formation through physicochemical processes although the vital activity controls the total mineralization.