Published papers
Aoyama, Hideki
181-200 items (total 365)
DESIGN EMERGING SYSTEM BY APPLYING CONSUMER’S PREFERENCE TO DESIGNER’S IDEA
- Author
- Kentarou Ohshima，Hideki Aoyama
- Publication Title
- Magazine name Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010) Publisher ASME Start Page 1-10 (Publication Date）2010/08）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
A STUDY ON COMPENSATION OF ORBITAL MOTION TO THE ELECTRODE DESIGN OF ORBITING ELECTRICAL DISCHARGE MACHINING (EDM)
- Author
- Tutik Sriani, Yuuki Nakamura, Hideki Aoyama
- Publication Title
- Magazine name Proceedings of 2010 ISFA (2010 International Symposium on Flexible Automation) Publisher ISCIE,ASME Start Page 1-7 (Publication Date）2010/07）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
CONSTRUCTION OF 3D CAD MODELS FROM ROUGH SKETCHES
- Author
- Shota Fukuchi, Hideki Aoyama, Norihito Hiruma
- Publication Title
- Magazine name Proceedings of 2010 ISFA (2010 International Symposium on Flexible Automation) Publisher ISCIE,ASME Start Page 1-7 (Publication Date）2010/07）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Novel Tool Design Method for Orbiting EDM -A 2nd Approach on Design Automation Development in CAD –
- Author
- Tutik SRIANI, Hideki AOYAMA
- Publication Title
- Magazine name Journal of Advanced Mechanical Design, Systems, and Manufacturing Volume Vol.4(Issue No.7) Start Page 1261-1271 (Publication Date）2010/07）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
System to Intuitively and Interactively Determine Tool Paths and Tool Postures Using Haptic Device
- Author
- Yumiko Suzuki, Steven Dreier, Hideki Aoyama, and Noriaki Sano
- Publication Title
- Magazine name Proceedings of CIRP 2nd International Conference on Process Machine Interactions Publisher CIRP Start Page 1-11 (Publication Date）2010/06）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Novel Tool Design Method for Orbiting Electrical Discharge Maching
- Author
- Tutik SRIANI, Yuki NAKAMURA, Hideki AOYAMA
- Publication Title
- Magazine name Journal of Advanced Mechanical Design, Systems, and Manufacturing Volume Vol.4(Issue No.6) Start Page pp.1182 - End Page 1191 (Publication Date）2010/06）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
デジタルスタイルデザインに関する研究 ―木目模様デザインのための基本システムの開発―
- Author
- 柴崎 慧, 青山 英樹
- Publication Title
- Volume Vol.76(Issue No.6) Start Page 840-845 (Publication Date）2010/06）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
Basic Study on Laser Forming CAM System for Sheet Material Forming Without Dies or Molds
- Author
- Toshihiko Nakamura, Shotaro Ishihara, Hideki Aoyama, Naohisa Matsushita, Akihiko Ushimaru
- Publication Title
- Magazine name International Journal of Automation Technology Volume Vol.4(Issue No.5) Start Page 447-453 (Publication Date）2010/05）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
Efficient Design Method Based on Evaluation Using CAE System
- Author
- Yuta SAWAI, Hideki AOYAMA
- Publication Title
- Magazine name Journal of Advanced Mechanical Design, System, and Manufacturing Volume Vol.4(Issue No.5) Start Page 827-830 (Publication Date）2010/05）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
LINKAGE OF POWER CONSUMPTION TO DESIGN FEATURE ON TURNING PROCESS
- Author
- ZAHARI TAHA, HANI KURNIATI, HIDEKI AOYAMA, RAJA ARIFFIN GHAZILLA, JULIROSE GONZALES, NOVITA SAKUNDARINI
- Publication Title
- Magazine name 10th WSEAS Int. Conf. on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY (ROCOM10)(ROCOM'10) Start Page pp.74 - End Page 78 (Publication Date）2010/04）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
- ISSN
- 1790-5117
Toolmaking Simulation on Orbiting EDM for Freeform Surface
- Author
- Tutik Sriani, Tuuki Nakamura, Hideki Aoyama
- Publication Title
- Magazine name Proceedings of The 2nd SEEAN University Network/ Southeast Asia Enginnering Education Development Network Regional Conference on Manufacturing Engineering 2009 Start Page A59-A64 (Publication Date）2009/12）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Generation of NC Program for Realizing High Speed Feed Rate of Cutting Tool
- Author
- Shintaro Sakurai1, Hideki Aoyama, Noriaki Sano
- Publication Title
- Magazine name Key Engineering Materials Start Page pp. 398-403 (Publication Date）2012）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Method to Decide Paths and Postures of Flat End Mill for 5-Axis Control Machining Based on Minimum Cusp Height
- Author
- Tatsuya Hokkyo1, Hideki Aoyama, Noriaki Sano
- Publication Title
- Magazine name Key Engineering Materials Start Page pp. 380-385 (Publication Date）2012）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Design Support Method Based on Analysis of Shape Impression
- Author
- HITOMI Yokoyama, HIDEKI Aoyama
- Publication Title
- Magazine name CADDM Volume Vol. 21(Issue No. 2) Start Page pp. 25-31 (Publication Date）2012）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
Product Evaluation Method Using Projection-Based Mixed Reality Technology
- Author
- Yuko Chinone, Hideki Aoyama, Tetsuo Oya
- Publication Title
- Magazine name Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) Publisher JSME Start Page pp. 1-6 (Publication Date）2012/12）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Digital Design Method of Wood Grain Pattern Based on Kansei
- Author
- Ryo Akiyama, Takuya Mori, Hideki Aoyama, Tetsuo Oya
- Publication Title
- Magazine name Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) Publisher JSME Start Page pp. 1-8 (Publication Date）2012/12）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Study on Supporting Universal Designs Using Vision Simulator for Elderly Persons
- Author
- Shiori YAMAUCHI, Hideki AOYAMA, Tetsuo Oya
- Publication Title
- Magazine name Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) Publisher JSME Start Page pp. 1-6 (Publication Date）2012/12）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
The Ease of Grasping to Evaluate Aesthetically Pleasing PET Bottle Design
- Author
- Khusnun Widiyati, Hideki AOYAMA
- Publication Title
- Magazine name Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) Publisher JSME Start Page pp. 1-6 (Publication Date）2012/12）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (international conference proceedings)
- Peer-review Status
- With
Taguchi Method for a Robust Design in Aesthetic (A PET Bottle Shape Case Study)
- Author
- Khusnun Widiyati, Hideki Aoyama
- Publication Title
- Volume Vol. 47(Issue No. 12) Start Page pp. 587-595 (Publication Date）2012/12）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
Toolpath Generation Method Based on Control Characteristics of Machine tool for High-Speed and High-Accuracy Machining
- Author
- Kosuke Saito, Hideki Aoyama, Noriaki Sano
- Publication Title
- Magazine name International Journal of Automation Technology Publisher Fuji Technology Press Ltd., Volume Vol. 6(Issue No. 6) Start Page pp. 697-703 (Publication Date）2012/11）
- Authorship Category
- Joint Work
- Publication Category
- Research paper (scientific journal)
- Peer-review Status
- With
- ISSN
- 1881-7629