Published papers

© 2018 The Author(s). X-ray free electron lasers (XFEL) provide intense and almost coherent X-ray pulses. They are used for various experiments investigating physical and chemical properties in materials and biological science because of their complete coherence, high intensity, and very short pulse width. In XFEL experiments, specimens are irradiated by XFEL pulses focused by mirror optics. The focused pulse is too intense to measure its coherence by placing an X-ray detector on the focal spot. Previously, a method was proposed for evaluating the coherence of focused pulses from the visibility of the diffraction intensity of colloidal particles by the speckle visibility spectroscopy (SVS). However, the visibility cannot be determined exactly because the diffraction intensity is integrated into each finite size detector pixel. Here, we propose a method to evaluate the coherence of each XFEL pulse by using SVS in combination with a theory for exact sampling of the diffraction pattern and a technique of multiplying the diffraction data by a Gaussian masks, which reduces the influence of data missing in small-angle regions due to the presence of a direct beamstop. We also introduce a method for characterizing the shot-by-shot size of each XFEL pulse by analysing the X-ray irradiated area.

© International Union of Crystallography, 2018 X-ray diffraction imaging is a technique for visualizing the structure of biological cells. In X-ray diffraction imaging experiments using synchrotron radiation, cryogenic conditions are necessary in order to reduce radiation damage in the biological cells. Frozen-hydrated biological specimens kept at cryogenic temperatures are also free from drying and bubbling, which occurs in wet specimens under vacuum conditions. In a previous study, the diffraction apparatus KOTOBUKI-1 [Nakasako et al. (2013), Rev. Sci. Instrum. 84, 093705] was constructed for X-ray diffraction imaging at cryogenic temperatures by utilizing a cryogenic pot, which is a cooling device developed in low-temperature physics. In this study a new cryogenic pot, suitable for tomography experiments, has been developed. The pot can rotate a biological cell over an angular range of ±170° against the direction of the incident X-ray beam. Herein, the details and the performance of the pot and miscellaneous devices are reported, along with established experimental procedures including specimen preparation. The apparatus has been used in tomography experiments for visualizing the three-dimensional structure of a Cyanidioschyzon merolae cell with an approximate size of 5 µm at a resolution of 136 nm. Based on the experimental results, the necessary improvements for future experiments and the resolution limit achievable under experimental conditions within a maximum tolerable dose are discussed.

© International Union of Crystallography, 2018 In structure analyses of proteins in solution by using small-angle X-ray scattering (SAXS), the molecular models are restored by using ab initio molecular modeling algorithms. There can be variation among restored models owing to the loss of phase information in the scattering profiles, averaging with regard to the orientation of proteins against the direction of the incident X-ray beam, and also conformational fluctuations. In many cases, a representative molecular model is obtained by averaging models restored in a number of ab initio calculations, which possibly provide nonrealistic models inconsistent with the biological and structural information about the target protein. Here, a protocol for classifying predicted models by multivariate analysis to select probable and realistic models is proposed. In the protocol, each structure model is represented as a point in a hyper-dimensional space describing the shape of the model. Principal component analysis followed by the clustering method is applied to visualize the distribution of the points in the hyper-dimensional space. Then, the classification provides an opportunity to exclude nonrealistic models. The feasibility of the protocol was examined through the application to the SAXS profiles of four proteins.

Copyright © 2018 American Chemical Society. Cuprous oxide (Cu2O) particles obtained by surfactant-assisted liquid-phase synthesis have cuboid shapes but the internal structures are difficult to be visualized by electron microscopy. Herein, we investigated the internal structures of numerous individual Cu2O particles with submicrometer dimensions by X-ray diffraction imaging (XDI) using X-ray free-electron laser (XFEL) pulses. The reconstructed two-dimensional electron density maps, which displayed inhomogeneous internal structures, were divided into five classes characterized by the positions and shapes of high and low electron density areas. Further analysis of the maps in each class by a manifold learning algorithm revealed that the internal structures of Cu2O particles varied in correlation with total electron density while retaining the characteristics within each class. On the basis of the analyses, we proposed a growth mechanism to yield the inhomogeneity in the internal structures of Cu2O particles in surfactant-mediated liquid-phase synthesis.

© 2018 by The American Society for Biochemistry and Molecular Biology, Inc. Phototropin2 (phot2) is a blue-light (BL) receptor that regulates BL-dependent activities for efficient photosynthesis in plants. phot2 comprises two BL-receiving light-oxygen-voltage–sensing domains (LOV1 and LOV2) and a kinase domain. BL-excited LOV2 is thought to be primarily responsible for the BL-dependent activation of the kinase. However, the molecular mechanisms by which small BL-induced conformational changes in the LOV2 domain are transmitted to the kinase remain unclear. Here, we used full-length wild-type and mutant phot2 proteins from Arabidopsis to study their molecular properties in the dark and under BL irradiation. Phosphoryl-ation assays and absorption measurements indicated that the LOV1 domain assists the thermal relaxation of BL-excited LOV2 and vice versa. Using small-angle X-ray scattering and electron microscopy, we observed that phot2 forms a dimer and has a rod shape with a maximum length of 188 Å and a radius of gyration of 44 Å. Under BL, phot2 displayed large conformational changes that bent the rod shape. By superimposing the crystal structures of the LOV1 dimer, LOV2, and a homology model of the kinase to the observed changes, we inferred that the BL-dependent change consisted of positional shifts of both LOV2 and the kinase relative to LOV1. Furthermore, phot2 mutants lacking the photocycle in LOV1 or LOV2 still exhibited conformational changes under BL, suggesting that LOV1 and LOV2 cooperatively contribute to the conformational changes that activate the kinase. These results suggest that BL-activated LOV1 contributes to the kinase activity of phot2. We discuss the possible intramolecular interactions and signaling mechanisms in phot2.

© 2019 Elsevier B.V. The fluorescence intensity of tryptophan residues in hen egg-white lysozyme was measured up to 500 ps after the excitation by irradiation pulses at 290 nm. From the time-dependent variation of fluorescence intensity in a wavelength range of 320–370 nm, the energy relaxation in the dynamic Stokes shift was reconstructed as the temporal variation in wavenumber of the estimated fluorescence maximum. The relaxation was approximated by two exponential curves with decay constants of 1.2 and 26.7 ps. To interpret the relaxation, a molecular dynamics simulation of 75 ns was conducted for lysozyme immersed in a water box. From the simulation, the energy relaxation in the electrostatic interactions of each tryptophan residue was evaluated by using a scheme derived from the linear response theory. Dipole–dipole interactions between each of the Trp62 and Trp123 residues and hydration water molecules displayed an energy relaxation similar to that experimentally observed regarding time constants and magnitudes. The side chains of these residues were partly or fully exposed to the solvent. In addition, by inspecting the variation in dipole moments of the hydration water molecules around lysozyme, it was suggested that the observed relaxation could be attributed to the orientational relaxation of hydration water molecules participating in the hydrogen-bond network formed around each of the two tryptophan residues.

© 2019 Federation of European Biochemical Societies Phytochrome B (phyB) is a plant photoreceptor protein that regulates various photomorphogenic responses to optimize plant growth and development. PhyB exists in two photoconvertible forms: a red light-absorbing (Pr) and a far-red light-absorbing (Pfr) form. Therefore, to understand the mechanism of phototransformation, the structural characterization of full-length phyB in these two forms is necessary. Here, we report the molecular structure of Arabidopsis thaliana phyB in Pr form and the molecular properties of the Pfr form determined by small-angle X-ray scattering coupled with size-exclusion chromatography. In solution, the Pr form associated as a dimer with a radius of gyration of 50 Å. The molecular shape was a crossed shape, in which the orientation of the photosensory modules differed from that in the crystal structure of dimeric photosensory module. PhyB exhibited structural reversibility in the Pfr-to-Pr phototransformation and thermal reversion from Pfr to Pr in the dark. In addition, Pfr only exhibited nonspecific association, which distinguished molecular properties of Pfr form from those of the inactive Pr form.

© 2020 American Chemical Society. Molecular dynamics (MD) simulations in biophysically relevant time scales of microseconds is a powerful tool for studying biomolecular processes, but results often display force field dependency. Therefore, assessment of force field accuracy using experimental data of biomolecules in solution is essential for simulation studies. Here, we propose the use of structural models obtained via cryo-electron microscopy (cryoEM), which provides biomolecular structures in vitreous ice mimicking the environment in solution. The accuracy of the AMBER (ff99SB-ILDN-NMR, ff14SB, ff15ipq, and ff15FB) and CHARMM (CHARMM22 and CHARMM36m) force fields was assessed by comparing their MD trajectories with the cryoEM data of thermostable hexameric glutamate dehydrogenase (GDH), which included a cryoEM map at a resolution of approximately 3 Å and structure models of subunits reflecting metastable conformations in domain motion occurring in GDH. In the assessment, we validated the force fields with respect to the reproducibility and stability of secondary structures and intersubunit interactions in the cryoEM data. Furthermore, we evaluated the force fields regarding the reproducibility of the energy landscape in the domain motion expected from the cryoEM data. As a result, among the six force fields, ff15FB and ff99SB-ILDN-NMR displayed good agreement with the experiment. The present study demonstrated the advantages of the high-resolution cryoEM map and suggested the optimal force field to reproduce experimentally observed protein structures.