Published papers

Purpose: A close relationship between sagittal spinal alignment and hip osteoarthritis (OA) has been documented. This study aimed to examine the relationship between hip joint proximity area and sagittal balance parameters in healthy subjects. Methods: This prospective study enrolled 47 healthy volunteers who underwent 320-detector row upright computed tomography. Acquired data were reconstructed in a virtual three-dimensional space. The proximity area was determined by < 1 mm of the Hausdorff distance between the acetabulum and the femoral head. Volunteers were divided into the anterior and posterior proximity groups depending on the position of the closest area. Sagittal balance parameters [sagittal vertical axis (SVA), T1 spinopelvic inclination (T1-SPi), T1-pelvic angle, pelvic tilt, sacral slope, pelvic incidence, lumbar lordosis, thoracic kyphosis), offset distance between the centre of the acoustic meati (CAM) and C7 plumb line (CAM-C7-offset), and offset distance between the CAM and hip axis (HA) (CAM-HA-offset)] were compared between the two groups using independent sample t test. Results: The anterior proximity group (n = 24) had higher SVA (p = 0.016) and T1-Spi (p = 0.015) than the posterior proximity group (n = 23). CAM-HA-offset was higher in the posterior than in the anterior proximity group (p < 0.000). There was no difference in other parameters (p > 0.05). Conclusion: The anterior proximity group had a positive anterior spinal balance; the posterior proximity group may have a more posterior gravity line than the hip joint centre. The anterior spinal balance may contribute to the anterior loading of the hip joint, with known relation with the initiation and onset of hip OA.

Background: Immune checkpoint inhibitors (ICIs) have demonstrated efficacy over previous cytotoxic chemotherapies in clinical trials among various tumors. Despite their favorable outcomes, they are associated with a unique set of toxicities termed as immune-related adverse events (irAEs). Among the toxicities, ICI-related pneumonitis has poor outcomes with little understanding of its risk factors. This retrospective study aimed to investigate whether pre-existing interstitial lung abnormality (ILA) is a potential risk factor for ICI-related pneumonitis. Materials and Methods: Patients with non-small cell lung cancer, malignant melanoma, renal cell carcinoma, and gastric cancer, who was administered either nivolumab, pembrolizumab, or atezolizumab between September 2014 and January 2019 were retrospectively reviewed. Information on baseline characteristics, computed tomography findings before administration of ICIs, clinical outcomes, and irAEs were collected from their medical records. Pre-existing ILA was categorized based on previous studies. Results: Two-hundred-nine patients with a median age of 68 years were included and 23 (11.0%) developed ICI-related pneumonitis. While smoking history and ICI agents were associated with ICI-related pneumonitis (P = .005 and .044, respectively), the categories of ILA were not associated with ICI-related pneumonitis (P = .428). None of the features of lung abnormalities were also associated with ICI-related pneumonitis. Multivariate logistic analysis indicated that smoking history was the only significant predictor of ICI-related pneumonitis (P = .028). Conclusion: This retrospective study did not demonstrate statistically significant association between pre-existing ILA and ICI-related pneumonitis, nor an association between radiologic features of ILA and ICI-related pneumonitis. Smoking history was independently associated with ICI-related pneumonitis. Further research is warranted for further understanding of the risk factors of ICI-related pneumonitis.

Objective: The engagement of the lap belt with the pelvis is critical for occupant safety during vehicle frontal crashes to prevent occupant submarining. This study aims to develop a predictive model for submarining risk based on anthropometric parameters and lap belt positioning using finite element (FE) analyses. Methods: FE analyses were conducted using human body models representing various body shapes (a 50th percentile male, low and high BMI males, and a 5th percentile female) in three seated postures (standard, reclined, and slouched). The lap belt-ASIS overlap and the belt-pelvis angle were used as key parameters for predicting submarining risk. A logistic regression analysis was utilized to correlate submarining occurrence with the initial values of these two parameters at the beginning of impact. Subsequently, this submarining prediction model was applied to computer tomography (CT) measurements of human subjects in different seated postures (upright, reclined, and slouched), and submarining risks were calculated based on the developed model. Results: FE simulations indicated that submarining was more likely to occur as the initial belt-pelvis angle approached zero and there was a smaller initial belt-ASIS overlap. The logistic regression analysis demonstrated that the initial belt-pelvis angle and belt-ASIS overlap were statistically significant for predicting submarining risk. The derived model effectively distinguished submarining occurrence based on the initial values of these two parameters. The application of the submarining model to CT measurements of human subjects showed that submarining risk was lower in the order of upright, slouched, and reclined postures. In the reclined posture, the high submarining risk was attributed to a small belt-ASIS overlap and a rearward-tilted pelvis angle; whereas in the slouched posture, the risk was mostly associated with a rearward-tilted pelvis angle. Conclusions: The submarining prediction model was developed based on the belt-pelvis angle and the belt-ASIS overlap. This predictive model may help to design restraint systems for various body types and seated postures of occupants.

Saphenous veins (SVs) are frequently employed as bypass grafts. The SV graft failure is predominantly seen at the valve site. Avoiding valves during vein harvest would help reduce graft failure. We endeavored to detect SV valves, tributaries, and vessel size employing upright computed tomography (CT) for the raw cadaver venous samples and in healthy volunteers. Five cadaver legs were scanned. Anatomical analysis showed 3.0 (IQR: 2.0–3.0) valves and 13.50 (IQR: 10.00–16.25) tributaries. The upright CT completely detected, compared to 2.0 (IQR: 1.5–2.5, p = 0.06) valves and 9.5 (IQR: 7.5–13.0, p = 0.13) tributaries by supine CT. From a total of 190 volunteers, 138 (men:75, women:63) were included. The number of valves from the SF junction to 35 cm were significantly higher in upright CT than in supine CT bilaterally [upright vs. supine, Right: 4 (IQR: 3–5) vs. 2 (IQR:1–2), p < 0.0001, Left: 4 (IQR: 3–5) vs. 2 (IQR: 1–2), p < 0.0001]. The number of tributaries and vessel areas per leg were also higher for upright compared with supine CT. Upright CT enables non-invasive detection of SV valves, tributaries, and vessel size. Although not tested here, it is expected that upright CT may potentially improve graft assessment for bypass surgery.

Background: Unilateral diaphragmatic paralysis is a condition in which the unilateral diaphragm is paralyzed and elevated. Orthopnea due to lung compression by an elevated diaphragm in the supine position is common in patients with unilateral diaphragmatic paralysis. Although its symptom is posture-dependent, the effect of posture on lung function in unilateral diaphragmatic paralysis has not been studied. Computed tomography (CT) can be used to assess lung volume. However, conventional CT cannot be performed in the upright position. A pulmonary function test can be performed in both upright and supine positions. However, it cannot evaluate the function of each lung separately. Case presentation: We report a case of a 79-year-old man with unilateral diaphragmatic paralysis. He presented with difficulty in inspiration, specifically in the supine position, and underwent both conventional supine CT and newly developed upright CT to assess the effect of posture on the function of each lung. The difference between expiratory and inspiratory lung volumes on CT in the supine position was less than that in the upright position by 46% and 4% on affected and healthy sides, respectively. We previously reported that the difference between expiratory and inspiratory lung volumes on CT correlated with inspiratory capacity on the pulmonary function test. A 46% decline in inspiratory capacity on the affected side in the supine position likely caused orthopnea in this patient. Conclusions: Supine/upright CT is helpful to assess the influence of posture on unilateral lung function in patients with unilateral diaphragmatic paralysis.

Purpose: This study aimed to assess the feasibility of upright radiation therapy for prostate cancer, compared to conventional supine radiation therapy, by quantitatively evaluating anatomic changes and their dosimetric impact through treatment planning simulations based on paired upright and supine positioning computed tomography (CT) images. Methods and Materials: This study compared pelvic organ anatomies and dose distributions, in hypothetical prostate cancer patients, between upright and supine prostate radiation therapy using paired CT images from asymptomatic volunteers. Anatomic changes in pelvic organ position, shape, volume, and rectal gas were quantitatively evaluated. Prostate radiation therapy was simulated on these CT images for volumetric modulated arc therapy with a prescribed dose of 60 Gy in 20 fractions. Dosimetric comparisons were performed using dose-volume histogram parameters based on a clinical protocol. Results: Fifty-one asymptomatic volunteers were registered. Compared to the supine position, pelvic organs in the upright position moved inferiorly (prostate: 2.8 mm ± 5.2, rectum: 2.9 mm ± 5.8, bladder: 3.7 mm ± 6.9, bowel: 25.2 mm ± 18.6; all P < .001). Rectal gas moved superiorly (4.8 mm ± 11.9; P = .004) and posteriorly (10.7 mm ± 23.5; P = .008). All dose-volume histogram parameters met the dose constraints, and the dose distributions of the upright and supine plans were clinically comparable in terms of organ-at-risk sparing and target coverage (P > .05). In some cases, the rectum curved more posteriorly in the upright position, allowing better sparing of high-dose areas, and the bladder moved inferiorly while expanding in the anterior-posterior direction in the upright position, preventing the small bowel from dropping into the radiation field. Conclusions: Our treatment planning simulation showed that upright radiation therapy for prostate cancer is feasible with a dose distribution comparable to that of conventional supine radiation therapy, despite significant anatomic changes in pelvic organ positioning between the upright and supine patient positions.

Understanding the transmission of forces through the joints of the lower limb under weight-bearing conditions is critical for assessing the progression of knee and ankle osteoarthritis, as well as for developing effective surgical and preventive strategies. This study presents the first simultaneous quantification of three-dimensional skeletal posture and ground reaction force vectors during quiet standing, utilizing upright computed tomography and a custom-made force plate. We constructed the force plate using two six-axis force sensors, and the coordinate system of the CT was aligned with that of the force plate using metal spheres attached to the edges of the force plate. This system enabled precise measurement of ground reaction force vectors relative to the skeletal posture. The present study demonstrated that the load-bearing axis (the line connecting the femoral head center to the midpoint of the distal tibial plafond) in healthy subjects during quiet standing is not identical to the actual line of force application. The analysis revealed that the force vectors generally pass slightly medioposterior to the femoral head center. By providing a detailed view of how force is transmitted through the lower limb joints, this system potentially offers new insights into joint loading patterns that possibly contribute to osteoarthritis development.

Objective: In vehicle frontal collisions, it is crucial that the lap belt is designed to engage with the anterior superior iliac spine (ASIS) of occupants for a reliable restraint. This study aims to understand the influence of different seated postures on the geometrical relationship of the seat belt and the pelvis for various occupants using 3D upright and supine computed tomography (CT) systems. Methods: The 3D shapes of bones and soft tissues around the pelvis were acquired through a CT scan for 30 participants. They were seated in a rigid seat equipped with a lap belt simulating the front seat of a small car, and wore a lap belt in three seated postures: upright, slouched and reclined. Parameters related to the likelihood of submarining occurrences, such as belt-ASIS overlap (an index for assessing the potential engagement of the lap belt with the ASIS) and the belt-pelvis angle (the difference between the belt angle and the normal direction of the anterior edge of the ilium) were compared. Results: It was observed that the pelvis angle tilted rearward as the hip point was positioned forward and seatback angle increased. This can be seen in the slouched and reclined posture. The belt-pelvis angle was comparable between the slouched and the reclined postures, and was closer to zero (indicating that the lap belt path is closer to perpendicular to the anterior edge of the ilium) compared to the upright posture. In contrast, the belt-ASIS overlap increased with an increasing flesh margin of the ASIS and shallower belt angle. This suggests that the belt-pelvis angle is influenced by the seated posture whereas the belt-ASIS overlap is dependent more on an individual’s anthropometry. The plot of belt-pelvis angle and belt-ASIS overlap exhibited significant variability among participants. Conclusions: The belt-pelvis angle and the belt-ASIS overlap of individuals will provide valuable information for understanding the current belt-fit location and predicting submarining occurrences for individuals in various postures when designing restraint systems.

OBJECTIVES. Cases of severe pectus excavatum presenting with worsening cardiopulmonary symptoms in the upright position have been reported. However, the underlying mechanism remains unclear. We evaluated posture-related morphological changes of the thorax in patients with pectus excavatum. METHODS. Chest morphology was evaluated preoperatively using upright and supine computed tomography in 21 patients with pectus excavatum and 35 healthy volunteers. The minimum anterior–posterior thoracic diameter, depression depth, and Haller index on horizontal sections, as well as the T6-12 plumb line distance on sagittal sections, were compared between the 2 positions. RESULTS. In patients with pectus excavatum (median age, 22 years; 18 males and 3 females), the minimum anterior–posterior diameter was smaller (4.5 vs 5.1 cm, P < 0.001) and the Haller index was greater (10.1 vs 6.4, P < 0.001) in the upright position than in the supine position. The T6-T12 plumb line distance was longer in the upright position (2.4 vs 0.8 cm, P < 0.001), while the depression depth showed no significant difference. Healthy volunteers exhibited similar changes. The degree of spinal curvature increased in the upright position due to the anterior shift of the lower thoracic vertebrae, resulting in a shorter anterior–posterior diameter, irrespective of chest wall deformity. One patient with dyspnoea only in the upright position exhibited compression of the right inferior pulmonary vein only on upright computed tomography. CONCLUSIONS. The minimum anterior–posterior diameter is shorter in the upright position. This may explain the worsening of cardiopulmonary symptoms in patients with severe pectus excavatum when in an upright position.

Background: Though alignment of the spine and lower extremities in the standing neutral position has been evaluated, a few studies evaluating the alignment of the upper extremities have also been made. This study assessed the normal alignment of the upper extremities in the standing neutral position and clarified the three-dimensional angular rotations of the upper extremity joints. Methods: Computed tomography (CT) images of 158 upper extremities from 79 healthy volunteers were prospectively acquired in the standing neutral position using an upright CT scanner. Three-dimensional coordinate systems of the thorax, scapula, humerus, and forearm were designated, and three-dimensional angular rotations of the scapulothoracic, glenohumeral, and elbow joints were calculated. Results: The median angle of the scapulothoracic joint was 9.2° (interquartile range [IQR], 5.2°–12.5°) of upward rotation, 29.0° (IQR, 24.9°–33.3°) of internal rotation, and 7.9° (IQR, 4.3°–11.8°) of anterior tilt. The median angle of the glenohumeral joint was 4.5° (IQR, 0.9°–7.8°) of abduction, 9.0° (IQR, 2.2°–19.0°) of internal rotation, and 0.3° (IQR, − 2.6°–3.1°) of extension. The median angle of the elbow joint was 9.8° (IQR, 6.9°–12.4°) of valgus, 90.2° (IQR, 79.6°–99.4°) of pronation, and 15.5° (IQR, 13.2°–18.1°) of flexion. Correlations in angular rotation values were found between the right and left upper extremities and between joints. Conclusions: This study clarified the three-dimensional angular rotation of upper extremity joints in the standing neutral position using an upright CT scanner. Our results may provide important insights for the functional evaluation of upper extremity alignment.

Motion capture systems using skin markers are widely used to evaluate scapular kinematics. However, soft-tissue artifact (STA) is a major limitation, and there is insufficient knowledge of the marker movements from the original locations. This study explores a scapular STA, including marker movements with shoulder elevation using upright computed tomography (CT). Ten healthy males (twenty shoulders in total) had markers attached to scapular bony landmarks and underwent upright CT in the reference and elevated positions. Marker movements were calculated and compared between markers. The bone-based and marker-based scapulothoracic rotation angles were also compared in both positions. The median marker movement distances were 30.4 mm for the acromial angle, 53.1 mm for the root of the scapular spine, and 70.0 mm for the inferior angle. Marker movements were significantly smaller on the superolateral aspect of the scapula, and superior movement was largest in the directional movement. Scapulothoracic rotation angles were significantly smaller in the marker-based rotation angles than in the bone-based rotation angles of the elevated position. We noted that the markers especially did not track the inferior movement of the scapular motion with shoulder elevation, resulting in an underestimation of the marker-based rotation angles.

Although shoulder kinematics have been analyzed by various methods, dynamic shoulder motion is difficult to track. This study aimed to validate the shoulder kinematic analysis using upright four-dimensional computed tomography (4DCT) and to compare the results with optical three-dimensional motion capture. During active elevation, bilateral shoulders of 10 healthy volunteers were tracked using 4DCT and motion capture. The scapulothoracic and glenohumeral rotations and the scapulohumeral rhythm (SHR) at each position were calculated, and the differences between 4DCT and motion capture were compared. During 10−140° of humerothoracic elevation, the scapulothoracic joint showed upward rotation, internal rotation, and posterior tilting, and the glenohumeral joint showed elevation, external rotation, and anterior plane of elevation in both analyses. In scapulothoracic rotations, the mean differences between the two analyses were −2.6° in upward rotation, 13.9° in internal rotation, and 6.4° in posterior tilting, and became significant with humerothoracic elevation ≥110° in upward rotation, ≥50° in internal rotation, and ≥100° in posterior tilting. In glenohumeral rotations, the mean differences were 3.7° in elevation, 9.1° in internal rotation, and −8.8° in anterior plane of elevation, and became significant with humerothoracic elevation ≥110° in elevation, ≥90° in internal rotation, and ≥100° in anterior plane of elevation. The mean overall SHRs were 1.8 in 4DCT and 2.4 in motion capture, and the differences became significant with humerothoracic elevation ≥100°. The 4DCT analysis of in vivo shoulder kinematics using upright computed tomography scanner is feasible, but the values were different from those by skin-based analysis at the elevated arm positions.

Cerebrospinal fluid (CSF) leakage is a common complication associated with endoscopic endonasal skull-base surgery (EESBS). Postoperative mobilization-associated postural changes are considered to cause CSF leakage. However, no study has demonstrated a robust relationship between postural changes and CSF leakage. We used upright computed tomography (CT) to clarify the effects of postural changes on the reconstructed skull base (RSB) after EESBS. Thirty patients who underwent EESBS at our institution were prospectively included, and their upright and supine CTs were compared to measure morphological changes in the RSB. Patient clinical data were also collected from medical charts and surgical videos, and their relationships with morphological changes were assessed. In upright CTs, the RSB shifted intracranially by 0.94 (0.0–2.9) mm on average. This shift was larger in cases with lesions extending to the sphenoid sinus, dural defects, intraoperative pulsation of the RSB, and large bone windows. The direction of the change was opposite to intuitive movement driven by gravity because of reduced intracranial pressure in the sitting position. Thus, these shifts can be directly associated with postoperative CSF leakage caused by reconstruction material displacement. Skull-base reconstruction and postoperative postural management accounting for these morphological changes may be necessary for preventing CSF leakage.

Deep learning-based image segmentation has allowed for the fully automated, accurate, and rapid analysis of musculoskeletal (MSK) structures from medical images. However, current approaches were either applied only to 2D cross-sectional images, addressed few structures, or were validated on small datasets, which limit the application in large-scale databases. This study aimed to validate an improved deep learning model for volumetric MSK segmentation of the hip and thigh with uncertainty estimation from clinical computed tomography (CT) images. Databases of CT images from multiple manufacturers/scanners, disease status, and patient positioning were used. The segmentation accuracy, and accuracy in estimating the structures volume and density, i.e., mean HU, were evaluated. An approach for segmentation failure detection based on predictive uncertainty was also investigated. The model has improved all segmentation accuracy and structure volume/density evaluation metrics compared to a shallower baseline model with a smaller training database (N = 20). The predictive uncertainty yielded large areas under the receiver operating characteristic (AUROC) curves (AUROCs ≥.95) in detecting inaccurate and failed segmentations. Furthermore, the study has shown an impact of the disease severity status on the model’s predictive uncertainties when applied to a large-scale database. The high segmentation and muscle volume/density estimation accuracy and the high accuracy in failure detection based on the predictive uncertainty exhibited the model’s reliability for analyzing individual MSK structures in large-scale CT databases.

Background: This study validated the accuracy of the acromion marker cluster (AMC) and scapula spinal marker cluster (SSMC) methods compared with upright four-dimensional computed tomography (4DCT) analysis. Methods: Sixteen shoulders of eight healthy males underwent AMC and SSMC assessments. Active shoulder elevation was tracked using upright 4DCT and optical motion capture system. The scapulothoracic and glenohumeral rotation angles calculated from AMC and SSMC were compared with 4DCT. Additionally, the motion of these marker clusters on the skin with shoulder elevation was evaluated. Results: The average differences between AMC and 4DCT during 10°−140° of humerothoracic elevation were − 2.2° ± 7.5° in scapulothoracic upward rotation, 14.0° ± 7.4° in internal rotation, 6.5° ± 7.5° in posterior tilting, 3.7° ± 8.1° in glenohumeral elevation, − 8.3° ± 10.7° in external rotation, and − 8.6° ± 8.9° in anterior plane of elevation. The difference between AMC and 4DCT was significant at 120° of humerothoracic elevation in scapulothoracic upward rotation, 50° in internal rotation, 90° in posterior tilting, 120° in glenohumeral elevation, 100° in external rotation, and 100° in anterior plane of elevation. However, the average differences between SSMC and 4DCT were − 7.5 ± 7.7° in scapulothoracic upward rotation, 2.0° ± 7.0° in internal rotation, 2.3° ± 7.2° in posterior tilting, 8.8° ± 7.9° in glenohumeral elevation, 2.0° ± 9.1° in external rotation, and 1.9° ± 10.1° in anterior plane of elevation. The difference between SSMC and 4DCT was significant at 50° of humerothoracic elevation in scapulothoracic upward rotation and 60° in glenohumeral elevation, with no significant differences observed in other rotations. Skin motion was significantly smaller in AMC (28.7 ± 4.0 mm) than SSMC (38.6 ± 5.8 mm). Although there was smaller skin motion in AMC, SSMC exhibited smaller differences in scapulothoracic internal rotation, posterior tilting, glenohumeral external rotation, and anterior plane of elevation compared to 4DCT. Conclusion: This study demonstrates that AMC is more accurate for assessing scapulothoracic upward rotation and glenohumeral elevation, while SSMC is preferable for evaluating scapulothoracic internal rotation, posterior tilting, glenohumeral external rotation, and anterior plane of elevation, with smaller differences compared to 4DCT.

Limited data exist with regard to the outcome of the Nuss procedure for pectus excavatum repair in adults. Here, we analysed changes in lung capacity and thoracic morphology based on computed tomography (CT) imaging in adults with pectus excavatum before surgery, during bar insertion and after bar removal. Patients who underwent the Nuss procedure for pectus excavatum after the age of 20 were included in this study. Chest CT scans of the included participants were taken before the Nuss procedure, immediately before removal of the pectus bar and 6 months after removal of the pectus bar. Lung capacity and thoracic morphology measurements were made from the CT scans. Six patients aged 24–43 years were included in this study. After the Nuss procedure, lung capacity was decreased in all patients. Although the pectus bar was removed, lung capacity had not significantly increased and was almost the same volume as before the Nuss procedure. After the Nuss procedure, the funnel chest shape had improved in all cases, patients’ thoracic spine had also moved forward as the thorax moved forward and patients’ stoop had improved. Despite a lack of change in lung capacity, surgical modification should be considered to reduce stress on the thoracic spine and in turn, reduce pain in patients with pectus excavatum. However, further long-term observation seems necessary.

In vehicle collisions, the lap belt should engage the anterior superior iliac spine (ASIS). In this study, threedimensional (3D) shapes of bones and soft tissues around the pelvis were acquired using a computed tomography (CT) scan of 10 male and 10 female participants wearing a lap belt. Standing, upright sitting, and reclined postures were scanned using an upright CT and a supine CT scan system. In the upright sitting posture, the thigh height was larger with a higher BMI while the ASIS height did not change significantly with BMI. As a result, the height of the ASIS relative to the thigh (ASIS-thigh height) became smaller as the BMI increased. Because the thigh height of females was smaller than that of males, the ASIS-thigh height was larger for females than for males. As the ASIS-thigh height was larger, the overlap of the lap belt with the ASIS increased. Thus, the lap belt overlapped more with the ASIS for the females than for the males. The abdomen outer shape is characterized by the trouser cord formed valley, the torso/thigh junction, and the anterior convexity formed between them depending on the adipose tissues. The abdomen outer shapes changed from the standing, the reclined posture to the upright sitting posture. In the reclined sitting posture, the lap belt is positioned upward and rearward relative to the ASIS, and the overlap of the lap belt with the ASIS was smaller compared to the upright posture.

Background: The effectiveness of facial massage is often explained by the resulting increases in the blood and lymphatic flow. However, it is difficult to explain the lifting effect on the cheeks. The aim of this study was to analyze facial mobility to further current understanding of the effectiveness of facial massage. Materials and Methods: Two kinds of analytical methods were designed using a cadaveric head as well as advanced computed tomography (CT). The cadaveric face was divided into three sections, and three different colors of ink were injected into each section. It was kept in a supine position for 24 hours, and the ink distribution was observed. Upright and supine CT examinations were performed on six healthy adult volunteers. The images of both were superimposed by a three-dimensional image analysis system, and changes in facial contours were analyzed. Results: The three colors of ink spread craniocaudally and were distributed differently from the gravitational vector. When both CT images were superimposed, two distinct lines were formed, which represented overlapping of the facial contours due to the two different CT images. These lines were found to correspond to the border of each color of the ink. Conclusion: Focusing on the mobility of the face, the soft tissue of the face had vertical mobility, and it was speculated that this mobility is involved in the effectiveness of facial massage. Our results could provide useful information for cosmetic treatment and contribute to the collection of scientific knowledge for anti-aging medicine.

The correlation between the anatomical cardiac and electrocardiographic axes has been discussed for several years. Using upright computed tomography, this study aimed to reveal the relationship between the anatomical cardiac and electrocardiographic axes in both the supine and upright positions. Upright CT and standard supine CT were performed for healthy volunteers, following electrocardiography in both upright and supine position. On CT images, the coordinates of apex, the center of aortic valve (AV) and mitral valve (MV) were recorded, and the vectors and angles were calculated. Subcutaneous and visceral fat volume were semi-automatically calculated in a workstation. From a total 190 volunteers, 41 males were performed electrocardiography and included for this study. The QRS and anatomical axes (AV-apex and MV-apex axis) were significantly correlated in both supine and upright positions, while the angle of the AV-apex to Z axis was the most correlated (supine: r = − 0.54, p = 0.0002, upright: r = − 0.47, p = 0.0020). The anatomical axis moved in the dorsal and caudal directions from the supine to upright position. Multiple regression analysis revealed that the anatomical axis from the AV-apex to the Z-axis was determined according to age, body height, subcutaneous and visceral fat volumes.

Objective: To quantitatively assess the impact of supine and standing positions on the morphological changes in the lumbar intervertebral foramen (LIF) in patients with adult spinal deformity (ASD) using upright CT and conventional supine CT. Materials and methods: Thirty patients with ASD were prospectively enrolled in this study. All subjects underwent standing whole spine posterior/anterior radiographs, lateral radiographs, and whole spine CT, both in the supine and upright standing positions. Two orthopedic surgeons independently measured nine radiographic parameters in the radiograph and the lumbar foraminal area (FA) and height (FH) in supine and upright CT. Statistical analyses were performed to evaluate the risk of LIF decrease when standing upright compared to the supine position. The chi-squared, t test, Pearson’s coefficients, intra- and inter-rater reliabilities, and ROC curves were calculated. The level of significance was set at p < 0.05. Results: Among the 300 LIFs, both the lumbar FA and FH were either increased or decreased by > 5% in approximately 30% of LIFs each. The FA decreased in the lower lumbar spine. The concave side had a significantly higher rate of decreased FA and FH than the convex side (p < 0.05 and < 0.05, respectively). ROC analysis showed that narrowing of the intervertebral disc (cutoff > 0.05°) is a risk factor for decreased FA and FH. Conclusions: This study describes the details of the changes in the neuroforamen using a novel upright CT. In patients with ASD, approximately 30% of LIFs either increased or decreased in size by > 5% when standing. The risk factors for LIF decrease are the lower lumbar spine, concave side, and narrow side of the disc wedge.